Rebuild all the salvage Miatas! ASS!
#2206
I made my own for my setup, but I believe FM sells wires for GM coils on a miata engine. On my setup the boots I ordered were smaller than advertised, and made assembly a HUGE pain in the butt. Otherwise they work fine. If someone sells a solution, I'd buy them. I've made wires for my miata twice now and each time was expensive and sucked.
#2207
I made my own for my setup, but I believe FM sells wires for GM coils on a miata engine. On my setup the boots I ordered were smaller than advertised, and made assembly a HUGE pain in the butt. Otherwise they work fine. If someone sells a solution, I'd buy them. I've made wires for my miata twice now and each time was expensive and sucked.
--Ian
#2213
SADFab Destructive Testing Engineer
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Thank you!!!
<br />Injector harness is done. Going over again tomorrow to get ignition harness done.
<br />Wires are run for seq spark, boost, VVT.
<br />Curly do we have a VVT pigtail?
<br />Also am I right in remembering that the 99/00. CAS is on the front of the engine and the VVT is on the back? So I need to extend those wires too?
<br />Injector harness is done. Going over again tomorrow to get ignition harness done.
<br />Wires are run for seq spark, boost, VVT.
<br />Curly do we have a VVT pigtail?
<br />Also am I right in remembering that the 99/00. CAS is on the front of the engine and the VVT is on the back? So I need to extend those wires too?
#2214
Cpt. Slow
iTrader: (25)
Join Date: Oct 2005
Location: Oregon City, OR
Posts: 14,360
Total Cats: 1,184
They were already extended, until we unwrapped them cause we thought it might be our short.
The vvt head is finiky with wires. Ideally it needs to be drilled out to 90-00 dimensiones, by a machinist, not you guys. I tried, but my bit walked. But it can work without doing all that. I made 350 hp with NA ngk wires and a vvt valve cover
The vvt head is finiky with wires. Ideally it needs to be drilled out to 90-00 dimensiones, by a machinist, not you guys. I tried, but my bit walked. But it can work without doing all that. I made 350 hp with NA ngk wires and a vvt valve cover
#2217
Supporting Vendor
Thread Starter
iTrader: (1)
Join Date: Sep 2010
Location: Lake Forest, CA
Posts: 7,976
Total Cats: 1,020
Ben and Aidan came out tonight and worked on wiring while I finished intercooler plumbing. Super huge help guys. Hoping for first fire tomorrow says Aidan.
<br />
<br />Got the passenger side NB2 door card fitted what a PITA. Driver side next, my dad is likely going to do that while I'm at work tomorrow.
<br />
<br />Reinstalled the Xidas. List to finish:
<br />
<br />-finish ignition wiring stuffs
<br />-wideband, MS mount, oil pressure and coolant temo gauge and senders.
<br />-brake ducts
<br />-install rear end links and re-bleed brakes
<br />-dash, seats, front glass. Going without radio stuffs for now I think.
<br />-vent windows. Not looking forward to this.
<br />-tune
<br />-Alignment
<br />
<br />... I think that's it.
<br />
<br />Got the passenger side NB2 door card fitted what a PITA. Driver side next, my dad is likely going to do that while I'm at work tomorrow.
<br />
<br />Reinstalled the Xidas. List to finish:
<br />
<br />-finish ignition wiring stuffs
<br />-wideband, MS mount, oil pressure and coolant temo gauge and senders.
<br />-brake ducts
<br />-install rear end links and re-bleed brakes
<br />-dash, seats, front glass. Going without radio stuffs for now I think.
<br />-vent windows. Not looking forward to this.
<br />-tune
<br />-Alignment
<br />
<br />... I think that's it.
#2219
Supporting Vendor
Thread Starter
iTrader: (1)
Join Date: Sep 2010
Location: Lake Forest, CA
Posts: 7,976
Total Cats: 1,020
<p>VICS solenoid is missing. Ed has now started porting his squaretop with a file. We may be here a while. He has now changed his mind back and we are running VICS without a solenoid.</p><p>Ok lets play the name that connector game. This is a 99/00 engine harness.</p><p>I think I have these all figured out but wanted to check</p><p>AIT</p><p><a href="http://imgur.com/vHP9qlz" target="_blank"><img alt="" src="https://i.imgur.com/vHP9qlzl.jpg" /></a></p><p>MAF sensor. (Might steal one for boost)</p><p><a href="http://imgur.com/MsrOkvy" target="_blank"><img alt="" src="https://i.imgur.com/MsrOkvyl.jpg" /></a></p><p>This is labeled the PSP switch. What is it?</p><p><a href="http://imgur.com/tQr344r" target="_blank"><img alt="" src="https://i.imgur.com/tQr344rl.jpg" /></a></p><p>CKP sensor</p><p><a href="http://imgur.com/6nH90Jl" target="_blank"><img alt="" src="https://i.imgur.com/6nH90Jll.jpg" /></a></p><p>Injector harness</p><p><a href="http://imgur.com/uiW9IdL" target="_blank"><img alt="" src="https://i.imgur.com/uiW9IdLl.jpg" /></a></p><p>Knock sensor</p><p><a href="http://imgur.com/wxIfSIU" target="_blank"><img alt="" src="https://i.imgur.com/wxIfSIUl.jpg" /></a></p><p>Front 02 sensor</p><p><a href="http://imgur.com/P6HKucR" target="_blank"><img alt="" src="https://i.imgur.com/P6HKucRl.jpg" /></a></p><p>VICS solenoid</p><p><a href="http://imgur.com/0jxFi1p" target="_blank"><img alt="" src="https://i.imgur.com/0jxFi1pl.jpg" /></a></p><p>Rear 02 sensor</p><p><a href="http://imgur.com/HRElV12" target="_blank"><img alt="" src="https://i.imgur.com/HRElV12l.jpg" /></a></p><p>EGR</p><p><a href="http://imgur.com/3BHWGTF" target="_blank"><img alt="" src="https://i.imgur.com/3BHWGTFl.jpg" /></a></p><p>Now the big question. I have this spare solenoid leftover from the charcoal canister. Can I just wire it into the VICS plug and plumb it as a VICS solenoid?</p>