New Dolphin Grey NC1 on the Block (Time Attack NC Build Thread)
#121
I did Navy ROTC in college, and had intended a career in the Navy, but things changed and I found a different path so I was never active duty. I was fortunate enough to spend a couple weeks at sea on the Missouri (BB-63) when she was recommissioned in '86 as part of my summer training. I was even more fortunate that particular week was gunnery qualifications so I was aboard for shooting all of the big guns, including a 15 gun broadside. Impressive stuff... 16" guns fired a 2300lb shell with a range of ~26 miles. Think in terms of throwing high explosive Miatas way over the horizon. The gunners bragged they could hit a phone booth at that distance, but I always figured the accuracy was more "Circle K". Close enough.
The Iowa class ships were 40 years old then, and pretty outdated compared to the 'modern' ships. Battleship trivia: all of the outside hatches had to be shut when firing the 16" guns because the concussion would damage the computers inside the ship. Sailors, however, were expendable, and allowed to be topside...
The Iowa class ships were 40 years old then, and pretty outdated compared to the 'modern' ships. Battleship trivia: all of the outside hatches had to be shut when firing the 16" guns because the concussion would damage the computers inside the ship. Sailors, however, were expendable, and allowed to be topside...
#122
Senior Member
Thread Starter
Join Date: Jun 2022
Location: Aliso Viejo, CA
Posts: 1,333
Total Cats: 259
I've only heard great things about Shaftworks stuff so far. We have 3+ cars locally that run them, 2 of which have taken a podium or win at nationals. The owner of the company is a long time autocrosser and seems like he's pretty hands on with setup/support questions. I'm not sure how popular they are for track vs autocross, but I'd imagine they'd do really well all around.
I did Navy ROTC in college, and had intended a career in the Navy, but things changed and I found a different path so I was never active duty. I was fortunate enough to spend a couple weeks at sea on the Missouri (BB-63) when she was recommissioned in '86 as part of my summer training. I was even more fortunate that particular week was gunnery qualifications so I was aboard for shooting all of the big guns, including a 15 gun broadside. Impressive stuff... 16" guns fired a 2300lb shell with a range of ~26 miles. Think in terms of throwing high explosive Miatas way over the horizon. The gunners bragged they could hit a phone booth at that distance, but I always figured the accuracy was more "Circle K". Close enough.
The Iowa class ships were 40 years old then, and pretty outdated compared to the 'modern' ships. Battleship trivia: all of the outside hatches had to be shut when firing the 16" guns because the concussion would damage the computers inside the ship. Sailors, however, were expendable, and allowed to be topside...
The Iowa class ships were 40 years old then, and pretty outdated compared to the 'modern' ships. Battleship trivia: all of the outside hatches had to be shut when firing the 16" guns because the concussion would damage the computers inside the ship. Sailors, however, were expendable, and allowed to be topside...
Last edited by Z_WAAAAAZ; Yesterday at 04:54 PM.
#123
Senior Member
Thread Starter
Join Date: Jun 2022
Location: Aliso Viejo, CA
Posts: 1,333
Total Cats: 259
I promised everyone that it was going to be a busy couple weeks, and I hope not to disappoint.
I got home last night and almost immediately ordered a set of 17x10 Konig Hypergrams from GoodWin Racing, as well as an ECUtek dongle/license/tune for my car from Fab9. I know I should be taking this leisurely and enjoying the process, and I am enjoying it, but I also enjoy having a fire lit under my *** and want to see what I can make this car capable of. I'm already signed up to hit the track Saturday and Sunday in two weekends, might as well see what this thing can do with a proper wheel/tire setup.
In all seriousness, I kinda ran into a conundrum with the wheel/tire setup that prompted me to grab the 17x10s. I'm currently on a 17x8 wheel and 235/40/17 300TW tires. I wanted to get some 200TW tires for this thing before the track day. However, 235s aren't really optimized for 17x8 wheels, 225s only come as 225/45/17 and are almost 3/4" larger in diameter than the 235s, and 215s are tiny and lame. I'm planning on running 255s on this car once it's making sufficient power, and am going to need some 10" wheels anyways. I considered grabbing some 17x9s in the interim, but I don't want to be buying wheels twice. We've got a couple guys around here who have ran 225s on 10" wheels while on a budget for non-competitive track days and had no problem, including the car I drove yesterday. I'm not going to go that stretched, but am planning on running 235s on the 17x10s for now. This might be a little much wheel/tire for the power the car's making currently, and result in a little stretch, but we'll see. I'm pretty confident I'll be satisfied with the setup. Lots of guys running 225/235s on 17x9s with completely stock power.
Grabbing the 17x10s will also allow me to keep the current wheels and tires mounted together so I can run them as a commute-only setup.
Higher, but not too high.
Sooooo in preparation for that, I went into work early and raised the car a bit today. It was a little on the low side previously and I was getting some minor rub on the fender liners and front shock towers. Ride heights were 12 5/8" front and 12 3/4" rear and I raised them to 13 1/4" front and 13 3/8" rear. Then I went to work on the alignment. Got the rear set up right where I wanted it but ended up maxing out the front camber at 2.6*. I was aware offset bushings would be needed to get over 3* of camber in the front but figured I'd at least get the rear dialed in and zero out toe so I could drive home without feeling bad for my current tires. Hopefully 949 Racing has their offset bushings in stock and I can grab a pair of them tomorrow.
I also got the harness install finished up this evening. Feels good to have a five point in the car again.
What else, what else... I guess that's it for now. Ordered a set of 235 NT05s (I know they're not the greatest 200TWs out there but got them cheap through work and I didn't have any major qualms with them on my NA. They should work fine as starter tires.) and those and the wheels should arrive tomorrow. The oil filter perch should show up later this week and I'll be able to mount my oil cooler after that. Saturday's looking like I'll be installing the offset bushings, aligning the front end, and getting the oil cooler mounted. Maybe I'll mount the oil cooler and lines sometime this week in preparation for the perch showing up. I think I can pull all that off. If not, at least you guys can laugh at me!
I got home last night and almost immediately ordered a set of 17x10 Konig Hypergrams from GoodWin Racing, as well as an ECUtek dongle/license/tune for my car from Fab9. I know I should be taking this leisurely and enjoying the process, and I am enjoying it, but I also enjoy having a fire lit under my *** and want to see what I can make this car capable of. I'm already signed up to hit the track Saturday and Sunday in two weekends, might as well see what this thing can do with a proper wheel/tire setup.
In all seriousness, I kinda ran into a conundrum with the wheel/tire setup that prompted me to grab the 17x10s. I'm currently on a 17x8 wheel and 235/40/17 300TW tires. I wanted to get some 200TW tires for this thing before the track day. However, 235s aren't really optimized for 17x8 wheels, 225s only come as 225/45/17 and are almost 3/4" larger in diameter than the 235s, and 215s are tiny and lame. I'm planning on running 255s on this car once it's making sufficient power, and am going to need some 10" wheels anyways. I considered grabbing some 17x9s in the interim, but I don't want to be buying wheels twice. We've got a couple guys around here who have ran 225s on 10" wheels while on a budget for non-competitive track days and had no problem, including the car I drove yesterday. I'm not going to go that stretched, but am planning on running 235s on the 17x10s for now. This might be a little much wheel/tire for the power the car's making currently, and result in a little stretch, but we'll see. I'm pretty confident I'll be satisfied with the setup. Lots of guys running 225/235s on 17x9s with completely stock power.
Grabbing the 17x10s will also allow me to keep the current wheels and tires mounted together so I can run them as a commute-only setup.
Higher, but not too high.
Sooooo in preparation for that, I went into work early and raised the car a bit today. It was a little on the low side previously and I was getting some minor rub on the fender liners and front shock towers. Ride heights were 12 5/8" front and 12 3/4" rear and I raised them to 13 1/4" front and 13 3/8" rear. Then I went to work on the alignment. Got the rear set up right where I wanted it but ended up maxing out the front camber at 2.6*. I was aware offset bushings would be needed to get over 3* of camber in the front but figured I'd at least get the rear dialed in and zero out toe so I could drive home without feeling bad for my current tires. Hopefully 949 Racing has their offset bushings in stock and I can grab a pair of them tomorrow.
I also got the harness install finished up this evening. Feels good to have a five point in the car again.
What else, what else... I guess that's it for now. Ordered a set of 235 NT05s (I know they're not the greatest 200TWs out there but got them cheap through work and I didn't have any major qualms with them on my NA. They should work fine as starter tires.) and those and the wheels should arrive tomorrow. The oil filter perch should show up later this week and I'll be able to mount my oil cooler after that. Saturday's looking like I'll be installing the offset bushings, aligning the front end, and getting the oil cooler mounted. Maybe I'll mount the oil cooler and lines sometime this week in preparation for the perch showing up. I think I can pull all that off. If not, at least you guys can laugh at me!
Thread
Thread Starter
Forum
Replies
Last Post