My Money Pit - part 2 (next time do it right the first time)
#61
Senior Member
Thread Starter
iTrader: (4)
Join Date: Nov 2009
Location: Toronto, ON
Posts: 1,446
Total Cats: 6
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I might actually be able to re-use my charge pipes. If it works, then I'll have to find another way to spend the money that was going to be used on the new IC and charge pipes....a hard top?
#62
Elite Member
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (9)
Join Date: Jun 2006
Location: Chesterfield, NJ
Posts: 6,922
Total Cats: 402
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
sorry i've been quite confused lately. I can get through 2 of the wider (10mm hex head) bolts with one drill without a problem. They tend to get dull in the middle of the 3rd or 4th bolt. And when they get dull they snap. Booo.
#68
Senior Member
Thread Starter
iTrader: (4)
Join Date: Nov 2009
Location: Toronto, ON
Posts: 1,446
Total Cats: 6
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I don't mean a brand new top from the dealer. I'm referring to a $300ish top that will probably require paint ![Laugh](https://www.miataturbo.net/images/smilies/laugh.gif)
Thanks, I would love to have it done in your mint green colour. Maybe one of these days.
![Laugh](https://www.miataturbo.net/images/smilies/laugh.gif)
Thanks, I would love to have it done in your mint green colour. Maybe one of these days.
Last edited by dgmorr; 03-18-2011 at 05:24 PM.
#75
Senior Member
Thread Starter
iTrader: (4)
Join Date: Nov 2009
Location: Toronto, ON
Posts: 1,446
Total Cats: 6
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Put in a bit more time adjusting the exhaust angles today and everything lines up well with no clearance issues. You can't really see it, but I have about 3/8" between the DP and 1/4" between the steering shaft. It'll probably need a bit more tweaking after the first drive.
![](https://lh6.googleusercontent.com/_CuifU1flaIo/TYZpNFNHPII/AAAAAAAABi8/KPbFR8ITaio/s800/IMG_1619%5B1%5D.JPG)
I also installed the oil cooler. Still have to do the lines and adapter, I don't feel like messing with fluids today (remove oil filter) so I'm leaving that for another day. I'm not sure which version of the FM oil cooler kit I have since their website always shows the Setrab heat exchangers and I got a Mocal. I know the tabs should be above the rack mounts, but I couldn't get it to fit.
![](https://lh3.googleusercontent.com/_CuifU1flaIo/TYZoS5ztrpI/AAAAAAAABi4/ISRbZOj2X7A/s800/IMG_1620%5B1%5D.JPG)
I put the rad back in and cut an OEM lower rad hose to work with the flipped mixing manifold. It fit perfectly, you'd think it was made to go that way.
![](https://lh5.googleusercontent.com/_CuifU1flaIo/TYZnehcINfI/AAAAAAAABis/h1R4vgAOt4g/s800/IMG_1617%5B1%5D.JPG)
The blue condom and zip ties is a result of Ontario winter/salt seizing the flare fittings. I wasn't able to dismantle the damned rack to do the FM de-power. I'll be looking for a solution eventually.
That's it for today. Still waiting on USPS with my turbine bolts, wtf.
I also installed the oil cooler. Still have to do the lines and adapter, I don't feel like messing with fluids today (remove oil filter) so I'm leaving that for another day. I'm not sure which version of the FM oil cooler kit I have since their website always shows the Setrab heat exchangers and I got a Mocal. I know the tabs should be above the rack mounts, but I couldn't get it to fit.
I put the rad back in and cut an OEM lower rad hose to work with the flipped mixing manifold. It fit perfectly, you'd think it was made to go that way.
The blue condom and zip ties is a result of Ontario winter/salt seizing the flare fittings. I wasn't able to dismantle the damned rack to do the FM de-power. I'll be looking for a solution eventually.
That's it for today. Still waiting on USPS with my turbine bolts, wtf.
Last edited by dgmorr; 03-20-2011 at 04:56 PM.
#76
Senior Member
Thread Starter
iTrader: (4)
Join Date: Nov 2009
Location: Toronto, ON
Posts: 1,446
Total Cats: 6
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I just installed the cooler lines. Right now I have two sandwich plates stacked at the oil filter. Seems a bit redundant to me, no idea why FM could not drill a couple holes in their plate for sensors. You guys think this is ok, or should I put my sensors somewhere else(oil psi and oil temp?)
#77
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
See if you can move the dump tube a bit closer to the downpipe.
The dump tube and downpipe move together when the engine rocks so the only space needed between them is to allow for thermal expansion which is measured in the thousands. You want more space between the moving and non-moving parts, like the steering shaft.
The dump tube and downpipe move together when the engine rocks so the only space needed between them is to allow for thermal expansion which is measured in the thousands. You want more space between the moving and non-moving parts, like the steering shaft.
#79
Senior Member
Thread Starter
iTrader: (4)
Join Date: Nov 2009
Location: Toronto, ON
Posts: 1,446
Total Cats: 6
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Right now the dump tube is bolted down using the mounting tab on the bottom. If I get steering shaft contact then I'll have to go buy a bottle of gas to weld on a new stainless tab. I might also get some different engine mounts to reduce the movement, I want to try and avoid tainting the nice exhaust pieces with my shitty MIG welding. I'm sure I'll get some contact on the track though.
There is a ton of room, but only 1/3 of the turbo sitting in there right now.
There is a ton of room, but only 1/3 of the turbo sitting in there right now.