My Money Pit - part 2 (next time do it right the first time)
#181
Senior Member
Thread Starter
iTrader: (4)
Join Date: Nov 2009
Location: Toronto, ON
Posts: 1,446
Total Cats: 6
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Almost didn't make it to the track today due to the heat, but I thought I'd torture test the car and see what happens. It was around 39* C. Water temp gauge slowly creeped up to about 3/4 while pushing really hard to keep pace with an annoying 911 with R comps - possibly from being in his draft. Never went past halfway otherwise. On the other hand, my friend had a typical day in the ownership of his e39 540i when one of his coolant hoses blew.
I had so much alone time on the track that I started getting bored and tried new lines and drifting. On one of the tight turns my outer front sidewall seemed to collapse and dig in hard. It made contact with my fender and julienned my tire.
![](https://lh4.googleusercontent.com/-pM9rCd1ddno/TieRHw617gI/AAAAAAAABzc/ZdOPrZHg0P0/s800/IMG_2223.JPG)
![](https://lh3.googleusercontent.com/-5qadOIlHGqw/TieRfmR1R2I/AAAAAAAABzg/ykxZ8agOZiw/s800/IMG_2221.JPG)
I got about 4GB video recordings of ****. My memory card is all corrupt. I would have had so many good clips. The only one that works is uploading to Youtube. It's slightly boring as I was driving pretty slowly waiting for people to get on the track. I'll post it in the morning.
Ordering some new rear pads as mine are now to the backing plate and screeching. I also thought my exhaust was broken, only later did I realize that I forgot to put my ear plugs in![get the **** out](https://www.miataturbo.net/images/smilies/gtfo.gif)
I had so much alone time on the track that I started getting bored and tried new lines and drifting. On one of the tight turns my outer front sidewall seemed to collapse and dig in hard. It made contact with my fender and julienned my tire.
I got about 4GB video recordings of ****. My memory card is all corrupt. I would have had so many good clips. The only one that works is uploading to Youtube. It's slightly boring as I was driving pretty slowly waiting for people to get on the track. I'll post it in the morning.
Ordering some new rear pads as mine are now to the backing plate and screeching. I also thought my exhaust was broken, only later did I realize that I forgot to put my ear plugs in
![get the **** out](https://www.miataturbo.net/images/smilies/gtfo.gif)
Last edited by dgmorr; 07-20-2011 at 11:40 PM.
#184
Senior Member
Thread Starter
iTrader: (4)
Join Date: Nov 2009
Location: Toronto, ON
Posts: 1,446
Total Cats: 6
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
No complaints whatsoever about the Wilwoods. I haven't even put the HT pads in yet. Still using the HPS (or was it HP+). I can't wait to get new tires, I think they're limiting my max braking right now.
#188
Senior Member
Thread Starter
iTrader: (4)
Join Date: Nov 2009
Location: Toronto, ON
Posts: 1,446
Total Cats: 6
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I had some scrap 304 turned into seat mounts. Need to find someone to make a couple bends for me. The plan is to do a small production run on these if there is enough interest. The 90* cuts will be rounded and the rear mount holes will be radiused off the fronts to allow for layback adjustment.
![](https://lh3.googleusercontent.com/-SLUZlFt8SxQ/TitZwtZRRGI/AAAAAAAAB0k/VXc1wrP9sl0/s800/IMG_2228.JPG)
![](https://lh3.googleusercontent.com/-X2kMY-QMYl8/TitZ_eaCv0I/AAAAAAAAB0s/aatAG1WQeMc/s800/IMG_2229.JPG)
#192
Senior Member
Thread Starter
iTrader: (4)
Join Date: Nov 2009
Location: Toronto, ON
Posts: 1,446
Total Cats: 6
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Turn your speakers down. You can hear the flat shifting in the first video
This is the first time I'm hearing my car from outside. I was driving, my friend filming.
I won't be making any Audi seat mounts.
On another note; do not run HT-10 front and DTC-30 rear. I had to be very conscious about my braking in order to not lock up the rears. Should I get DTC-30 in the front, or get HT-10 in the rear? Both of these pads sound like they're machining my rotors down to dust.
I thought I turned the camera off, but it was in continuous photo mode so I have like a billion pics now. The GoPro is pissing me off.
![](https://lh3.googleusercontent.com/-3pyWBVp_neQ/TjQWmcwV1FI/AAAAAAAAB2k/OtQX6DkVMoE/s800/GOPR0130.JPG)
![Giggle](https://www.miataturbo.net/images/smilies/gay.gif)
I won't be making any Audi seat mounts.
On another note; do not run HT-10 front and DTC-30 rear. I had to be very conscious about my braking in order to not lock up the rears. Should I get DTC-30 in the front, or get HT-10 in the rear? Both of these pads sound like they're machining my rotors down to dust.
I thought I turned the camera off, but it was in continuous photo mode so I have like a billion pics now. The GoPro is pissing me off.
Last edited by dgmorr; 07-30-2011 at 06:41 PM.
#198
Senior Member
Thread Starter
iTrader: (4)
Join Date: Nov 2009
Location: Toronto, ON
Posts: 1,446
Total Cats: 6
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Got most of it apart, just have to clean everything, measure and wait for parts.
The new rod feels like there is a hair of play on the wrist pin while the stocker feels tight, but both rod small ends measure 0.789".
![](https://www.miataturbo.net/attachments/build-threads-57/25845-my-money-pit-part-2-next-time-do-right-first-time-2z4z19d.jpg?dateline=1317729968)
The new rod feels like there is a hair of play on the wrist pin while the stocker feels tight, but both rod small ends measure 0.789".
![](https://www.miataturbo.net/attachments/build-threads-57/25845-my-money-pit-part-2-next-time-do-right-first-time-2z4z19d.jpg?dateline=1317729968)
![](https://www.miataturbo.net/attachments/build-threads-57/25846-my-money-pit-part-2-next-time-do-right-first-time-15fisf9.jpg?dateline=1317729968)