My miata SR20DET build
#44
Elite Member
iTrader: (12)
Join Date: Nov 2009
Location: Harpers Ferry WV
Posts: 1,516
Total Cats: 20
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Yea I would deff be putting some supports on that. I built my the exactly the opposite the big part of the mount is vertical with horizontal and diagonal supports. Good luck and it is looking good so far.
#45
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Yeah those pics are not of the mounts finished. I went and added a lot more to the mounts i also have rubber under between the mounts. I am not worred about the mounts im more worried on what im going to do with the hood. The engine hits the turbo hits so im thinking cowled hood or have the valve cover modded and make a cut out in the hood for the turbo.
http://www.summitracing.com/parts/SUM-470800/
i was going to use this and mold it in so i could try and make looks stock ish. I need something 27-32" wide and no longer then 36".
http://www.summitracing.com/parts/SUM-470800/
i was going to use this and mold it in so i could try and make looks stock ish. I need something 27-32" wide and no longer then 36".
#52
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Damn, that's sucks man.
I'm sure you could have a new manifold/dp made to lower the turbo, but to clear the engine this came to mind.
http://www.simpsondesign.net/louv_cowl_hood.htm
I'm sure you could have a new manifold/dp made to lower the turbo, but to clear the engine this came to mind.
http://www.simpsondesign.net/louv_cowl_hood.htm