My awesome daily project 35mpg/150whp highway donut
#61
Tour de Franzia
![](/mt2011/images_td/ranks/supporter1.gif)
Thread Starter
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Can the VVT fuel rail work on the 99 plenum with a 1994 fuel pressure regulator? I thought I had a 99 rail, but it turns out it from my 1.6 for whatever reason.
I just used this to get an idea of injector size and if I want 150whp is says I'll need a 310cc injector...is that right? That seems like a ton of fuel for a low output number.
I just used this to get an idea of injector size and if I want 150whp is says I'll need a 310cc injector...is that right? That seems like a ton of fuel for a low output number.
Last edited by hustler; 03-13-2012 at 05:39 PM.
#64
mkturbo.com
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/admin.png)
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,189
Total Cats: 1,685
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Can the VVT fuel rail work on the 99 plenum with a 1994 fuel pressure regulator? I thought I had a 99 rail, but it turns out it from my 1.6 for whatever reason.
I just used this to get an idea of injector size and if I want 150whp is says I'll need a 310cc injector...is that right? That seems like a ton of fuel for a low output number.
I just used this to get an idea of injector size and if I want 150whp is says I'll need a 310cc injector...is that right? That seems like a ton of fuel for a low output number.
The 01+ fuel rail will not work. It has the flange for the FPR on the bottom and with an NA FPR installed it hits ---- somewhere. I forget what exactly hits and where, as it has been 2+ years since I tried. Below are pictures of a 99 fuel rail with the flange on the end. It still currently has the stock 99 FPR installed. You just unbolt it and install the other FPR and it will work. I will try to get pictures of how mine looks on my car tomorrow if I get home while it is still light out.
![](https://www.miataturbo.net/attachments/build-threads-57/36754-my-awesome-daily-project-35mpg-150whp-highway-donut-img_20120313_195938.jpg?dateline=1331685357)
![](https://www.miataturbo.net/attachments/build-threads-57/36755-my-awesome-daily-project-35mpg-150whp-highway-donut-img_20120313_195928.jpg?dateline=1331685357)
#65
Supporting Vendor
![](/mt2011/images_td/ranks/vendor.png)
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (33)
Join Date: Jul 2006
Location: atlanta-ish
Posts: 12,659
Total Cats: 134
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Update:
MS2+ is paid for.
Question:
I have a VVT engine...What should I do about intake plenums and throttle bodies?
I have a 2001 plenum with IAC and t-body
I have a 1999 plenum with no IAC and no t-body
I have a1994 IAC and t-body that does not work.
Right now I'm hoping I can use the 1999 plenum, 2001 T-body, and 2001 IAC valve. Tell me this is possible.
Also, what is the best route to go for a fuel rail on my 1995 car? I have a 99 fuel rail, 2001 fuel rail, and I think the best option will be to buy a dual feed. This way it will be easier to use a real fuel pressure regulator instead of jacking with that fuel damper ----.
MS2+ is paid for.
Question:
I have a VVT engine...What should I do about intake plenums and throttle bodies?
I have a 2001 plenum with IAC and t-body
I have a 1999 plenum with no IAC and no t-body
I have a1994 IAC and t-body that does not work.
Right now I'm hoping I can use the 1999 plenum, 2001 T-body, and 2001 IAC valve. Tell me this is possible.
Also, what is the best route to go for a fuel rail on my 1995 car? I have a 99 fuel rail, 2001 fuel rail, and I think the best option will be to buy a dual feed. This way it will be easier to use a real fuel pressure regulator instead of jacking with that fuel damper ----.
It will with minimal effort.
#71
Tour de Franzia
![](/mt2011/images_td/ranks/supporter1.gif)
Thread Starter
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Unfortunately there are no injectors in this engine so I have to buy something. Anyone want to sell some stock injectors on the cheap?
#72
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I have a whole box of stock Honda B-series EV1 injectors if you can use them. I also have a couple of these in the shop:
http://www.extremepsi.com/store/prod...roductid=17652
that I can put a set of calipers on later this week if you can measure the o-ring bore on the rail you have. From a quick glance I think a 1G reg has the same mounting provisions as the Miata reg, meaning $24 gets you out of the rail to a good regulator. I may also have an extra Fuel Lab or Aeromotive reg I can sell you for cheapish.
http://www.extremepsi.com/store/prod...roductid=17652
that I can put a set of calipers on later this week if you can measure the o-ring bore on the rail you have. From a quick glance I think a 1G reg has the same mounting provisions as the Miata reg, meaning $24 gets you out of the rail to a good regulator. I may also have an extra Fuel Lab or Aeromotive reg I can sell you for cheapish.
#73
Tour de Franzia
![](/mt2011/images_td/ranks/supporter1.gif)
Thread Starter
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I have a whole box of stock Honda B-series EV1 injectors if you can use them. I also have a couple of these in the shop:
http://www.extremepsi.com/store/prod...roductid=17652
that I can put a set of calipers on later this week if you can measure the o-ring bore on the rail you have. From a quick glance I think a 1G reg has the same mounting provisions as the Miata reg, meaning $24 gets you out of the rail to a good regulator. I may also have an extra Fuel Lab or Aeromotive reg I can sell you for cheapish.
http://www.extremepsi.com/store/prod...roductid=17652
that I can put a set of calipers on later this week if you can measure the o-ring bore on the rail you have. From a quick glance I think a 1G reg has the same mounting provisions as the Miata reg, meaning $24 gets you out of the rail to a good regulator. I may also have an extra Fuel Lab or Aeromotive reg I can sell you for cheapish.
This wouldn't be such a big deal if I weren't dreadfully out of money. Thank you very much for helping out.
#76
Elite Member
iTrader: (37)
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,448
Total Cats: 1,900
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I've got a set of NB2 purples pulled from a running 04 no more than 2 years ago. I don't think I paid more than $20 for them. I've had this swap on my brain for a while and I'd give them up just to watch this project move forward and get documented. Visiting the post office tomorrow AM, let me know.
![Biggthumpup](https://www.miataturbo.net/images/smilies/biggthumpup.gif)
#77
Tour de Franzia
![](/mt2011/images_td/ranks/supporter1.gif)
Thread Starter
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I've got a set of NB2 purples pulled from a running 04 no more than 2 years ago. I don't think I paid more than $20 for them. I've had this swap on my brain for a while and I'd give them up just to watch this project move forward and get documented. Visiting the post office tomorrow AM, let me know. ![Biggthumpup](https://www.miataturbo.net/images/smilies/biggthumpup.gif)
![Biggthumpup](https://www.miataturbo.net/images/smilies/biggthumpup.gif)
I love this forum. Thanks so much.
#79
Tour de Franzia
![](/mt2011/images_td/ranks/supporter1.gif)
Thread Starter
iTrader: (6)
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,085
Total Cats: 375
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Does anyone have a picture of what the 2001 CKP sensor and bracket should look like mounted-up? I scoured the interweb and can't seem to find a pic of it mounted, Mazdaspeed doesn't show a bracket for it. I have the sensor, but using "lego-theory" I can't figure out what it bolts to.
My sensor:
![](https://www.miataturbo.net/attachments/build-threads-57/36808-my-awesome-daily-project-35mpg-150whp-highway-donut-dscn6799.jpg?dateline=1331729658)
#80
mkturbo.com
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/admin.png)
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,189
Total Cats: 1,685
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Thanks.
Does anyone have a picture of what the 2001 CKP sensor and bracket should look like mounted-up? I scoured the interweb and can't seem to find a pic of it mounted, Mazdaspeed doesn't show a bracket for it. I have the sensor, but using "lego-theory" I can't figure out what it bolts to.
My sensor:
![](https://www.miataturbo.net/attachments/build-threads-57/36808-my-awesome-daily-project-35mpg-150whp-highway-donut-dscn6799.jpg?dateline=1331729658)
Does anyone have a picture of what the 2001 CKP sensor and bracket should look like mounted-up? I scoured the interweb and can't seem to find a pic of it mounted, Mazdaspeed doesn't show a bracket for it. I have the sensor, but using "lego-theory" I can't figure out what it bolts to.
My sensor:
![](https://www.miataturbo.net/attachments/build-threads-57/36808-my-awesome-daily-project-35mpg-150whp-highway-donut-dscn6799.jpg?dateline=1331729658)
There is no actual "bracket". Basically you put a bolt through that whole on the sensor into a hole somewhere on the oil pump.