Mobius's Build - Brotrex and Bromex galore!
#101
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
After disconnecting the line, I just stick a golf tee that I pilfered from my friend in it. A Bic pen works ok, too, if I remember correctly. lol
Regardless, gas doesn't spill everywhere, and the job gets done quickly.
Regardless, gas doesn't spill everywhere, and the job gets done quickly.
#102
Elite Member
iTrader: (37)
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,448
Total Cats: 1,900
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
How loud is that DW? My Wally 190HP is has always been loud and I've always found it obnoxious. I think recently its started getting louder, so I've been preparing for the worst.
A friend just pulled the main fuel line out of his NB1, I may see if its worth trying to set up my car with a legit return system
A friend just pulled the main fuel line out of his NB1, I may see if its worth trying to set up my car with a legit return system
![wink](https://www.miataturbo.net/images/smilies/wink.gif)
#103
Elite Member
![](/mt2011/images_td/ranks/supporter1.gif)
Thread Starter
iTrader: (2)
Join Date: May 2008
Location: Portland, Oregon
Posts: 3,468
Total Cats: 365
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I cannot hear it over the exhaust. Maybe if I put the stock muffler back on.
Golf tees did not work for me. I had the long driving range tees and couldn't get a seal. Meanwhile there's a footwide puddle and it was soaking down my sleeves.
It's a 60k/48mo service item, it's not all that much extra work to disconnect the lines up top so that they will drain and empty at the filter. I'll just do that next time to ensure it will drain and empty. I hate wearing gasoline.
Golf tees did not work for me. I had the long driving range tees and couldn't get a seal. Meanwhile there's a footwide puddle and it was soaking down my sleeves.
It's a 60k/48mo service item, it's not all that much extra work to disconnect the lines up top so that they will drain and empty at the filter. I'll just do that next time to ensure it will drain and empty. I hate wearing gasoline.
#104
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I made a topic about this fuel filter issue and I just got made fun of. What I ended up doing was having the new fuel filter ready with the other end with the plastic cap still on it. Snap the old one off, a little fuel spills and then snap the new one on and then you have all the time in the world to bolt everything back up and remove the other end cap and plug it all back in.
#105
Elite Member
![](/mt2011/images_td/ranks/supporter1.gif)
Thread Starter
iTrader: (2)
Join Date: May 2008
Location: Portland, Oregon
Posts: 3,468
Total Cats: 365
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Yeah. In my garage, on jackstands, with limited clearance, I'm just going to open the other end of the lines so that I can simply undo that first connetion and let it all drain into a container. Maybe 4 oz. Then I've got all the time in the world, cuz there's no gas in the lines.
It takes maybe 5 minutes to pop the clips and roll the carpet up, another 5 to remove the cover and pop the fuel lines off the pump assembly. Longer, of course, the very first time you do it, but still worth it imo.
It takes maybe 5 minutes to pop the clips and roll the carpet up, another 5 to remove the cover and pop the fuel lines off the pump assembly. Longer, of course, the very first time you do it, but still worth it imo.
#107
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Yeah. In my garage, on jackstands, with limited clearance, I'm just going to open the other end of the lines so that I can simply undo that first connetion and let it all drain into a container. Maybe 4 oz. Then I've got all the time in the world, cuz there's no gas in the lines.
It takes maybe 5 minutes to pop the clips and roll the carpet up, another 5 to remove the cover and pop the fuel lines off the pump assembly. Longer, of course, the very first time you do it, but still worth it imo.
It takes maybe 5 minutes to pop the clips and roll the carpet up, another 5 to remove the cover and pop the fuel lines off the pump assembly. Longer, of course, the very first time you do it, but still worth it imo.
#108
Elite Member
iTrader: (37)
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,448
Total Cats: 1,900
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Time is relative, all depends on one's point of reference. Just let me know when you are ready to start wrenching again, you know I'm down. BTW: I cleaned and sanitized both of your growers yesterday. I'm sure I can find a gallon of beer around here somewhere. Now we can drink while we rewire your car
![Party Kitty](https://www.miataturbo.net/images/smilies/birthday[1].gif)
#109
Elite Member
![](/mt2011/images_td/ranks/supporter1.gif)
Thread Starter
iTrader: (2)
Join Date: May 2008
Location: Portland, Oregon
Posts: 3,468
Total Cats: 365
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Got the wing mounted. Had to trim the trunk liners a bit to get access to the nuts. Rivnuts proved not feasible since the clearance is so tight. Wing is back off the car to get the Rustoleum applied to the mounts.
Also, got the RS3's/9"6UL's on, and put about 30 miles or so on them to scrub them and get some sort of initial heat cycle into them. On the freeway, compared to the 205 rivals, they are a bit louder, and they tramline a bit (compared to the Rivals tracking completely straight), but they don't tramline anything like what the 225 RS2's on the 8's did.
Lousy pic of the initial installation:
Also, got the RS3's/9"6UL's on, and put about 30 miles or so on them to scrub them and get some sort of initial heat cycle into them. On the freeway, compared to the 205 rivals, they are a bit louder, and they tramline a bit (compared to the Rivals tracking completely straight), but they don't tramline anything like what the 225 RS2's on the 8's did.
Lousy pic of the initial installation:
![](https://www.miataturbo.net/attachments/build-threads-57/73092d1365626293-mobiuss-build-brotrex-bromex-galore-wingmounttestfit-large-.jpg)
#116
Elite Member
![](/mt2011/images_td/ranks/supporter1.gif)
Thread Starter
iTrader: (2)
Join Date: May 2008
Location: Portland, Oregon
Posts: 3,468
Total Cats: 365
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
What, I would go to a track day without my trailer and all of my rubber ??
Yes, bringing them. RS3's are on the car now. If it's wet I'll swap that morning. Have to bed the xp8's tomorrow (already broken in, but just put them on after a long nap, want to redo the bedding procedure), get gas, put gas in the 5gallon cans, and put the wing on.
If it's not wet I'll run sessions on both. Actually, I will probably run sessions on both regardless. Moar data! Which reminds me I want to up my tire pressure a bit in the Rivals.
Yes, bringing them. RS3's are on the car now. If it's wet I'll swap that morning. Have to bed the xp8's tomorrow (already broken in, but just put them on after a long nap, want to redo the bedding procedure), get gas, put gas in the 5gallon cans, and put the wing on.
If it's not wet I'll run sessions on both. Actually, I will probably run sessions on both regardless. Moar data! Which reminds me I want to up my tire pressure a bit in the Rivals.