Möbius build 3.0 : Crash testing Miatas like he works for the NHTSA
#183
Elite Member
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (2)
Join Date: May 2008
Location: Portland, Oregon
Posts: 3,468
Total Cats: 365
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
From the manual:
4. After verifying that the first code is repeated,
depress the brake pedal 10 times or more at
intervals of less than 1 seconds.
5. Turn the ignition key to OFF and disconnect the
jumper wire.
Note
• DTCs cannot be cleared if the following occur:
— If intervals of depressing the brake pedal exceed 1 seconds.
— The brake switch has failed.
So I suppose it's possible it's still not seeing the brake signal. I'll verify 12v is showing up on that pin when I get back.
4. After verifying that the first code is repeated,
depress the brake pedal 10 times or more at
intervals of less than 1 seconds.
5. Turn the ignition key to OFF and disconnect the
jumper wire.
Note
• DTCs cannot be cleared if the following occur:
— If intervals of depressing the brake pedal exceed 1 seconds.
— The brake switch has failed.
So I suppose it's possible it's still not seeing the brake signal. I'll verify 12v is showing up on that pin when I get back.
#185
Elite Member
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (2)
Join Date: May 2008
Location: Portland, Oregon
Posts: 3,468
Total Cats: 365
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Yes, oh great one.
I will follow the whole diag tree in the FSM, starting with the sensor resistance, voltage output, and continuity to the abs brain connector on both wires.
July 2st. After I get back on the 30th, and after running to the ups store to pick up my precision core.
I will follow the whole diag tree in the FSM, starting with the sensor resistance, voltage output, and continuity to the abs brain connector on both wires.
July 2st. After I get back on the 30th, and after running to the ups store to pick up my precision core.
#191
Elite Member
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (2)
Join Date: May 2008
Location: Portland, Oregon
Posts: 3,468
Total Cats: 365
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Aidan - yes, I am positive. The rears I purchased which were supposed to be NB2 were nb1. Different connector so I had to hardwire them. I had the fronts from the green car.
G- aren't you a Mr. fancy Pants. Pm'ed you.
G- aren't you a Mr. fancy Pants. Pm'ed you.
#193
Supporting Vendor
![](/mt2011/images_td/ranks/vendor.png)
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (1)
Join Date: Sep 2010
Location: Lake Forest, CA
Posts: 7,968
Total Cats: 1,014
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Well this is an interesting situation.
I sold my spindle/hub to G, then realized I needed it after all so I bought one from Richard off his green car. Now Richard needs one, and it sounds as if he will likely buy my old one from G...
I sold my spindle/hub to G, then realized I needed it after all so I bought one from Richard off his green car. Now Richard needs one, and it sounds as if he will likely buy my old one from G...
#194
Elite Member
iTrader: (37)
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,441
Total Cats: 1,899
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
![wink](https://www.miataturbo.net/images/smilies/wink.gif)
#196
Elite Member
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (2)
Join Date: May 2008
Location: Portland, Oregon
Posts: 3,468
Total Cats: 365
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I am starting to plan my intercooler piping. Last time I followed the MSM routing behind the headlight on the hotside, but I doubt I will do that this time. Feel free to post any good examples of TSE manifold hotside pics. Traveling today and search is slow using the phone.
#198
mkturbo.com
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/admin.png)
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,188
Total Cats: 1,684
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I am starting to plan my intercooler piping. Last time I followed the MSM routing behind the headlight on the hotside, but I doubt I will do that this time. Feel free to post any good examples of TSE manifold hotside pics. Traveling today and search is slow using the phone.