Ian's 99 build thread
#421
Elite Member
![](/mt2011/images_td/ranks/supporter1.gif)
Thread Starter
Join Date: Mar 2007
Location: Santa Clara, CA
Posts: 5,178
Total Cats: 858
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
![](https://www.miataturbo.net/images/smilies/smile.gif)
--Ian
#422
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Gotcha, makes sense. I too had valve float with a turbo at higher RPMs with stock springs. So I guess the answer to why you don't run more timing at 7K vs 6.5 is that the valve springs are floating and you don't rev that high anyway?
I'm actually working on my setup to try and make more midrange so I don't have to rev it as high for reliability and stock cam happiness.
I'm actually working on my setup to try and make more midrange so I don't have to rev it as high for reliability and stock cam happiness.
#423
Elite Member
![](/mt2011/images_td/ranks/supporter1.gif)
Thread Starter
Join Date: Mar 2007
Location: Santa Clara, CA
Posts: 5,178
Total Cats: 858
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I spent a while looking at compressor maps today -- got tired of picking points to compare them and decided to play with them in photoshop. I took the 6258 vs 2863 maps, rescaled them to the same size and overlaid:
![](https://www.miataturbo.net/attachments/build-threads-57/153332-ians-99-build-thread-6258-2863-cmap.jpg?dateline=1445670772)
The two compressors are pretty close to each other!
--Ian
![](https://www.miataturbo.net/attachments/build-threads-57/153332-ians-99-build-thread-6258-2863-cmap.jpg?dateline=1445670772)
The two compressors are pretty close to each other!
--Ian
#425
Elite Member
![](/mt2011/images_td/ranks/supporter1.gif)
Thread Starter
Join Date: Mar 2007
Location: Santa Clara, CA
Posts: 5,178
Total Cats: 858
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
So I guess my Miata has been trying to pretend it's an FD -- blowing vacuum lines off all over the place. It never did it with the 2560, I guess the extra 8 or 9 psi of boost is enough to make the difference.
Lost the MAP sensor line at the dyno before Laguna, lost a bunch of the wastegate lines *at* Laguna, and then blew off the the little right-angle line that connects the upper and lower halves of the VICS manifold at the dyno a few weeks ago. This evening I was prepping the car for Thunderhill and decided to go through and properly secure whatever hadn't been done yet and found that the line that feeds the VICS chamber was about 1/4 inch from blowing off. Had to pull the manifold apart to get to it, but I *think* I've got them all now.
Thunderhill 3 mile course on Friday!
--Ian
![](https://www.miataturbo.net/images/smilies/smile.gif)
Thunderhill 3 mile course on Friday!
--Ian
#430
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
So I guess my Miata has been trying to pretend it's an FD -- blowing vacuum lines off all over the place. It never did it with the 2560, I guess the extra 8 or 9 psi of boost is enough to make the difference.
Lost the MAP sensor line at the dyno before Laguna, lost a bunch of the wastegate lines *at* Laguna, and then blew off the the little right-angle line that connects the upper and lower halves of the VICS manifold at the dyno a few weeks ago. This evening I was prepping the car for Thunderhill and decided to go through and properly secure whatever hadn't been done yet and found that the line that feeds the VICS chamber was about 1/4 inch from blowing off. Had to pull the manifold apart to get to it, but I *think* I've got them all now.
Thunderhill 3 mile course on Friday!
--Ian
![](https://www.miataturbo.net/images/smilies/smile.gif)
Thunderhill 3 mile course on Friday!
--Ian
Good luck at the track! For the truck, if you are actually worried about it starting, grab a can of WD40. Worst case it won't crank, it will with a shot of WD40.
#439
Elite Member
![](/mt2011/images_td/ranks/supporter1.gif)
Thread Starter
Join Date: Mar 2007
Location: Santa Clara, CA
Posts: 5,178
Total Cats: 858
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
The heat from the turbo was destroying the zip ties on the wastegate, they got brown, lost all flexibility and started cracking. Safety wire was the right answer for those.
I think the MAP sensor I'd just forgotten to zip tie it, so it's zip tied now. Most of the vacuum lines on the car are just zip ties.
The ones in the guts of the VICS manifold are straight pipe with no barb on them, and zip ties don't have anything to grab onto, plus they're almost impossible to get tight due to lack of clearance. I used safety wire on those this morning.
There *is* one vacuum line left with no restraints on it, it's the one that connects to the VICS vacuum reservoir that's integral in the bottom half of the manifold. It's underneath the fuel rail, and seriously a PITA to get to, but it's also on the other side of a one-way check valve, so it should never see boost.
I am too old to camp at the race track. Hell, I was too old to camp at the race track when I was 25.
I like the Baymont in Willows, much better than the Best Western because the rooms are actually quiet enough to sleep in without being woken up by trucks rumbling down the freeway.
--Ian
I think the MAP sensor I'd just forgotten to zip tie it, so it's zip tied now. Most of the vacuum lines on the car are just zip ties.
The ones in the guts of the VICS manifold are straight pipe with no barb on them, and zip ties don't have anything to grab onto, plus they're almost impossible to get tight due to lack of clearance. I used safety wire on those this morning.
There *is* one vacuum line left with no restraints on it, it's the one that connects to the VICS vacuum reservoir that's integral in the bottom half of the manifold. It's underneath the fuel rail, and seriously a PITA to get to, but it's also on the other side of a one-way check valve, so it should never see boost.
I am too old to camp at the race track. Hell, I was too old to camp at the race track when I was 25.
![](https://www.miataturbo.net/images/smilies/smile.gif)
--Ian
#440
Elite Member
![](/mt2011/images_td/ranks/supporter1.gif)
Thread Starter
Join Date: Mar 2007
Location: Santa Clara, CA
Posts: 5,178
Total Cats: 858
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Actually, now that I think about, I'm simultaneously both too old and not old enough to camp at the track. I'm too old to put up with a tent, but I'm not old enough to bring an RV. ![](https://www.miataturbo.net/images/smilies/smile.gif)
--Ian
![](https://www.miataturbo.net/images/smilies/smile.gif)
--Ian