I have no idea what I'm doing!
#21
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Brand new MSM clutch from Rosenthal is $314.66.
Bet you could find it a bit cheaper if you shop around, or if you have access to Mazda Motorsports program.
Part #s:
BP1216410 - pressure plate
BP1216460 - disc
Alternatively, vteckiller2000 will be pulling the clutch out of our old MSM soon. It's got about 30k on it, max. I bet he'd give it to you for cheap.
Bet you could find it a bit cheaper if you shop around, or if you have access to Mazda Motorsports program.
Part #s:
BP1216410 - pressure plate
BP1216460 - disc
Alternatively, vteckiller2000 will be pulling the clutch out of our old MSM soon. It's got about 30k on it, max. I bet he'd give it to you for cheap.
#24
Senior Member
Thread Starter
iTrader: (2)
Join Date: May 2010
Location: Beckley, WV
Posts: 851
Total Cats: 37
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Small progress. Last pieces needed before install are all the hoses/fittings for oil etc. and my clutch still. My DD broke down so I believe that has zapped my funds for both of those. I guess i'm back in waiting mode.
Spent part of Sunday refinishing my manifold and took a closer look at all my parts.
Used por15 Manifold paint. Says it is good up to 1500F. We will see. I stripped it down taking off any loose rust, used por15 marine clean then metal prep. The metal prep stuff is great, it changes rust, from being rust.
![](https://www.miataturbo.net/attachments/build-threads-57/105683-i-have-no-idea-what-im-doing-505b4552a7da11e393180e650af46df4_8.jpg?dateline=1394450868)
My beautiful downpipe. I also have some exhaust paint coming I plan on using on this thing. I didn't make it. It came as part of a packaged deal. I will use it for a season or so, until I can afford nicer.
![](https://www.miataturbo.net/attachments/build-threads-57/105684-i-have-no-idea-what-im-doing-13046904295_eb66ee7d57_z.jpg?dateline=1394450868)
![](https://www.miataturbo.net/attachments/build-threads-57/105685-i-have-no-idea-what-im-doing-13047011963_4f33070b22.jpg?dateline=1394450868)
'
My exhaust
![](https://www.miataturbo.net/attachments/build-threads-57/105687-i-have-no-idea-what-im-doing-13046851125_6639c0ae73.jpg?dateline=1394450868)
Turbo. It is a Chinese version of a gt28. It is also not the pretties, but I don't plan on refinishing it. I hope to replace it and the dp as soon as possible.
![](https://www.miataturbo.net/attachments/build-threads-57/105688-i-have-no-idea-what-im-doing-13047021743_160521c2bd.jpg?dateline=1394450868)
![](https://www.miataturbo.net/attachments/build-threads-57/105689-i-have-no-idea-what-im-doing-13047191474_22db15fba2.jpg?dateline=1394450868)
And my gauges
![](https://www.miataturbo.net/attachments/build-threads-57/105690-i-have-no-idea-what-im-doing-13047202874_a991de9487_n.jpg?dateline=1394450868)
Spent part of Sunday refinishing my manifold and took a closer look at all my parts.
Used por15 Manifold paint. Says it is good up to 1500F. We will see. I stripped it down taking off any loose rust, used por15 marine clean then metal prep. The metal prep stuff is great, it changes rust, from being rust.
![](https://www.miataturbo.net/attachments/build-threads-57/105683-i-have-no-idea-what-im-doing-505b4552a7da11e393180e650af46df4_8.jpg?dateline=1394450868)
My beautiful downpipe. I also have some exhaust paint coming I plan on using on this thing. I didn't make it. It came as part of a packaged deal. I will use it for a season or so, until I can afford nicer.
![](https://www.miataturbo.net/attachments/build-threads-57/105684-i-have-no-idea-what-im-doing-13046904295_eb66ee7d57_z.jpg?dateline=1394450868)
![](https://www.miataturbo.net/attachments/build-threads-57/105685-i-have-no-idea-what-im-doing-13047011963_4f33070b22.jpg?dateline=1394450868)
![](https://www.miataturbo.net/attachments/build-threads-57/105686-i-have-no-idea-what-im-doing-13046878285_c3cf05912c.jpg?dateline=1394450868)
My exhaust
![](https://www.miataturbo.net/attachments/build-threads-57/105687-i-have-no-idea-what-im-doing-13046851125_6639c0ae73.jpg?dateline=1394450868)
Turbo. It is a Chinese version of a gt28. It is also not the pretties, but I don't plan on refinishing it. I hope to replace it and the dp as soon as possible.
![](https://www.miataturbo.net/attachments/build-threads-57/105688-i-have-no-idea-what-im-doing-13047021743_160521c2bd.jpg?dateline=1394450868)
![](https://www.miataturbo.net/attachments/build-threads-57/105689-i-have-no-idea-what-im-doing-13047191474_22db15fba2.jpg?dateline=1394450868)
And my gauges
![](https://www.miataturbo.net/attachments/build-threads-57/105690-i-have-no-idea-what-im-doing-13047202874_a991de9487_n.jpg?dateline=1394450868)
![](https://www.miataturbo.net/attachments/build-threads-57/105691-i-have-no-idea-what-im-doing-13047197064_4cb7559482_n.jpg?dateline=1394450868)
#27
Senior Member
Thread Starter
iTrader: (2)
Join Date: May 2010
Location: Beckley, WV
Posts: 851
Total Cats: 37
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
![vash](https://www.miataturbo.net/images/smilies/vash.gif)
#29
Senior Member
Thread Starter
iTrader: (2)
Join Date: May 2010
Location: Beckley, WV
Posts: 851
Total Cats: 37
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
QUESTION: Is there anyway to tell if my '95 has the pre-tapped oil feed without taking off parts to see down there? I tried randomly looking yesterday but since I was in work clothes I couldn't dig too much and between the heatshilds and other stuff, I couldn't tell. Do we happen to know a vin range? Mine is an obd1.
#33
Elite Member
![](/mt2011/images_td/ranks/supporter1.gif)
iTrader: (5)
Join Date: Oct 2011
Location: Detroit (the part with no rules or laws)
Posts: 5,680
Total Cats: 804
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Yup.
When i put my 95 block in i had it. But while doing research i found a lot of misinformation. Some say all 95's had it and some say only half or so of them had it..
When i put my 95 block in i had it. But while doing research i found a lot of misinformation. Some say all 95's had it and some say only half or so of them had it..
#34
Senior Member
Thread Starter
iTrader: (2)
Join Date: May 2010
Location: Beckley, WV
Posts: 851
Total Cats: 37
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Just for my future reference, here is what turbo i will be running
Emusa GT28 (GT2870). Here are the more detailed specs. Compressor Wheel 0.60 A/R Cold Side IND: 54mm EX D: 70mm Trim: 60 Turbiner Wheel 0.64 A/R. Waste gate is ~10psi (if it is still the stock one).
Emusa GT28 (GT2870). Here are the more detailed specs. Compressor Wheel 0.60 A/R Cold Side IND: 54mm EX D: 70mm Trim: 60 Turbiner Wheel 0.64 A/R. Waste gate is ~10psi (if it is still the stock one).
#35
Senior Member
Thread Starter
iTrader: (2)
Join Date: May 2010
Location: Beckley, WV
Posts: 851
Total Cats: 37
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Well, to continue my progress of having no idea what i'm doing, I can't figure out what size hoses I have for my oil feed and drain.
For my oil feed, I need to add a 90° end fitting to -4 AN. BUT, I can't figure out my the size of the feed line. I have never messed with hoses, fittings etc so I have no clue about sizing and eyeballing what is what. I know after the first time of holding each one in my hand I would never have another issue, but I don't have access to any other than my unknown lines.
Here is the feed line.
![](https://www.miataturbo.net/attachments/build-threads-57/108141-i-have-no-idea-what-im-doing-13047191474_22db15fba2.jpg?dateline=1396363611)
![](https://www.miataturbo.net/attachments/build-threads-57/108142-i-have-no-idea-what-im-doing-13560844513_9b8302d306.jpg?dateline=1396363611)
Then for my drain line, I'm not certain if it is -8 or -10. I need to purchase a drain fitting and don't know if I need an adapter or can just plug right on.
![](https://www.miataturbo.net/attachments/build-threads-57/108143-i-have-no-idea-what-im-doing-13561119014_c03f4e0d41.jpg?dateline=1396363611)
![](https://www.miataturbo.net/attachments/build-threads-57/108144-i-have-no-idea-what-im-doing-13560777655_5bcbfc799a.jpg?dateline=1396363611)
edit: will get pictures this evening with measuring tape.
For my oil feed, I need to add a 90° end fitting to -4 AN. BUT, I can't figure out my the size of the feed line. I have never messed with hoses, fittings etc so I have no clue about sizing and eyeballing what is what. I know after the first time of holding each one in my hand I would never have another issue, but I don't have access to any other than my unknown lines.
Here is the feed line.
![](https://www.miataturbo.net/attachments/build-threads-57/108141-i-have-no-idea-what-im-doing-13047191474_22db15fba2.jpg?dateline=1396363611)
![](https://www.miataturbo.net/attachments/build-threads-57/108142-i-have-no-idea-what-im-doing-13560844513_9b8302d306.jpg?dateline=1396363611)
Then for my drain line, I'm not certain if it is -8 or -10. I need to purchase a drain fitting and don't know if I need an adapter or can just plug right on.
![](https://www.miataturbo.net/attachments/build-threads-57/108143-i-have-no-idea-what-im-doing-13561119014_c03f4e0d41.jpg?dateline=1396363611)
![](https://www.miataturbo.net/attachments/build-threads-57/108144-i-have-no-idea-what-im-doing-13560777655_5bcbfc799a.jpg?dateline=1396363611)
edit: will get pictures this evening with measuring tape.
Last edited by Tekel; 04-01-2014 at 11:03 AM.