HornetBall's Build #2: Meet Red
#82
Elite Member
Thread Starter
iTrader: (4)
Join Date: Mar 2008
Location: Granbury, TX
Posts: 6,301
Total Cats: 696
Lots of great comments in here recently.
I need to research the subframe differences. I noticed that Emilio puts NB front subframes on his cars, but I honestly hadn't considered it. Hmmmm . . .
Consider the crash support metal gone. Thanks.
On the rear bar, car currently has RB front and rear bars (I have the OEM bars as well). On the other car, I run an RB front and OEM rear and have been pretty happy with the balance. I've noticed other track-types run the RB front and either OEM rear or no rear. What's the recommendation for 150RWHP? Guess I'll go review Emilio's 95R build thread.
N TX = No Rust + Hail Dents (speed dimples). Fortunately, this car was garaged so no hail dents. Only real damage was PO induced (hammer and drill).
Is removing the tar really worth it? How much weight are we talking about? Looks like a huge PITA to me.
You should add the 99-05 subframes will you have it all torn apart, keeping carpet is nice as dust collects in your garage and on your first out lap blows all in your face, pull the bumpers and remove those big hunks of crash support metal, order a different rear bar.
Consider the crash support metal gone. Thanks.
On the rear bar, car currently has RB front and rear bars (I have the OEM bars as well). On the other car, I run an RB front and OEM rear and have been pretty happy with the balance. I've noticed other track-types run the RB front and either OEM rear or no rear. What's the recommendation for 150RWHP? Guess I'll go review Emilio's 95R build thread.
Is removing the tar really worth it? How much weight are we talking about? Looks like a huge PITA to me.
#83
IMO my buddy ran with out a rear sway and we didnt like it at all. The rear end felt like swinging a pick up truck around corners. It had slightly better traction as weight would transfer to each wheel more but the rear roll was annoying and sloppy. I use to run an FM rear and took it off and put the stocker back on. The FM was too stiff and gave me a lot of oversteer.
#88
Elite Member
Thread Starter
iTrader: (4)
Join Date: Mar 2008
Location: Granbury, TX
Posts: 6,301
Total Cats: 696
My Silver car has 550/325 FCM Bilsteins. This car is getting 700/400 Xida CS.
318/233 is really soft -- but probably about all the KYBs can handle. I can see how dropping the rear bar would feel lousy with those rates.
318/233 is really soft -- but probably about all the KYBs can handle. I can see how dropping the rear bar would feel lousy with those rates.
Last edited by hornetball; 03-26-2014 at 08:58 PM.
#89
Elite Member
iTrader: (2)
Join Date: May 2008
Location: Portland, Oregon
Posts: 3,468
Total Cats: 365
Dude! If you are getting Xida's already just put the big grip kit on it and call it done. Emilio has done all the hard work for you already, just use the configurator and plug in your expected tires.
Everybody that rides in my car is amazed by the suspension. Everybody.
Everybody that rides in my car is amazed by the suspension. Everybody.
#90
Elite Member
Thread Starter
iTrader: (4)
Join Date: Mar 2008
Location: Granbury, TX
Posts: 6,301
Total Cats: 696
Car already has the RB front sway and adjustable end links (unfortunately, the RBs). I have a full set of control arms with urethane bushings pre-installed sitting on the workbench (bought these from RHarris for cheap a while back). Bottom line, once I add the Xidas I'll basically have a big grip kit.
Oh, I also picked up some TSE prawns with full hose kit from a friend for $80. They will replace the OEM backing plates that suffered from PO hammering.
Oh, I also picked up some TSE prawns with full hose kit from a friend for $80. They will replace the OEM backing plates that suffered from PO hammering.
#93
Elite Member
Thread Starter
iTrader: (4)
Join Date: Mar 2008
Location: Granbury, TX
Posts: 6,301
Total Cats: 696
A little bit of piddling last night.
Started experimenting with seat bracket shapes. Wanted to see how the Ultrashields would sit with different shapes. Looking at TDR's seat mount as an example, here's one shape I cam up with:
This one doesn't give a lot of leeway to move the seat back. I'll probably end up having to remove the rear OEM seat bracket bumps.
Also mounted the NACA inlet for my planned CAI. I know Emilio says not to overthink it . . . but I can't help myself.
Business end:
Won't be much progress this weekend though. Grandson's birthday party in Houston.
Started experimenting with seat bracket shapes. Wanted to see how the Ultrashields would sit with different shapes. Looking at TDR's seat mount as an example, here's one shape I cam up with:
This one doesn't give a lot of leeway to move the seat back. I'll probably end up having to remove the rear OEM seat bracket bumps.
Also mounted the NACA inlet for my planned CAI. I know Emilio says not to overthink it . . . but I can't help myself.
Business end:
Won't be much progress this weekend though. Grandson's birthday party in Houston.
#97
Cpt. Slow
iTrader: (25)
Join Date: Oct 2005
Location: Oregon City, OR
Posts: 14,360
Total Cats: 1,184
TSIs kinda point towards the bulb part of the headlight when they're down. Amateur aerodynamics says they won't work until the headlights are up, and any benefit is most likely outweighed by the parachute effect of the barn doors. Emphasis on amateur.
The headlight lid however, empties with a direct path to an area many of us place our filters. They're also designed to more or less suck in air, it's not just that tiny 1/2"x3" hole you see. I'd consider the NACA headlight lid a bigger bang for buck over the TSIs.
The headlight lid however, empties with a direct path to an area many of us place our filters. They're also designed to more or less suck in air, it's not just that tiny 1/2"x3" hole you see. I'd consider the NACA headlight lid a bigger bang for buck over the TSIs.
#98
TSIs kinda point towards the bulb part of the headlight when they're down. Amateur aerodynamics says they won't work until the headlights are up, and any benefit is most likely outweighed by the parachute effect of the barn doors. Emphasis on amateur.
The headlight lid however, empties with a direct path to an area many of us place our filters. They're also designed to more or less suck in air, it's not just that tiny 1/2"x3" hole you see. I'd consider the NACA headlight lid a bigger bang for buck over the TSIs.
The headlight lid however, empties with a direct path to an area many of us place our filters. They're also designed to more or less suck in air, it's not just that tiny 1/2"x3" hole you see. I'd consider the NACA headlight lid a bigger bang for buck over the TSIs.
I know the positive air flow around that area isn't amazing but just a thought.
#99
Cpt. Slow
iTrader: (25)
Join Date: Oct 2005
Location: Oregon City, OR
Posts: 14,360
Total Cats: 1,184
Again, amateur aerodynamics at work, but I believe air is hitting the fairly vertical part of the bumper below the turn signals and forcing everything past the TSI, not really into. Do some yarn testing with a gopro!