Basic low boost build: Noob does it all wrong.
#223
I actually pulled the stereo out of the Fit and took it down to Warminster today. Was a lot of fun since I had three friends come down as well to run against.
My one friend has a 2001 Celica GTS with shocks and springs on newish Sport Comp 2's. Other friend has a nicely done up 2004 Sentra 1.8S with shocks, springs, sways, bushings, geometry mods and chassis bracing running on DZ102's. It is a nice quick car, fun to drive. Last friend brought his 2001 Imprezza 2.5RS on Yoko S.Drives.
My Fit has bilstein coil overs and 5 year old all seasons... and I whopped them all. Guess we need to autocross more so they can get better. Got the centra by 0.5s, subaru by 1s and the celica by 2s. Video to come of the Fit.
My one friend has a 2001 Celica GTS with shocks and springs on newish Sport Comp 2's. Other friend has a nicely done up 2004 Sentra 1.8S with shocks, springs, sways, bushings, geometry mods and chassis bracing running on DZ102's. It is a nice quick car, fun to drive. Last friend brought his 2001 Imprezza 2.5RS on Yoko S.Drives.
My Fit has bilstein coil overs and 5 year old all seasons... and I whopped them all. Guess we need to autocross more so they can get better. Got the centra by 0.5s, subaru by 1s and the celica by 2s. Video to come of the Fit.
#225
Replaced the front caliper and the rear one that had the parking brake sticking (they warenteed it, since it was starting to do it regularly, even when cold...)
Got some time to work on the new supercharger as well.
The old bearings push out.
Clean it real nice. It's in good shape!
New bearings pressed in.
Got some time to work on the new supercharger as well.
The old bearings push out.
Clean it real nice. It's in good shape!
New bearings pressed in.
#228
Turns out I have no good way to drill any hole bigger than 1/2" in anything thicker than sheet metal. And I need to put the IAT sensor into the throttle manifold. So I broke out the 4 jaw chuck and bored out a hole instead. Fits nice.
And here are all the parts that will hopefully be going in tomorrow. A crazy missmash of three different kits. No intercooler for now, I mostly want to get the supercharger installed before the winter to make sure it is working well with the new bearings and such. Gonna run it with a slightly larger than stock pulley (stock for this kit would have been 72.5mm, the one on there is 75 from a BRP MP62 kit as far as I can tell) and make sure all is well. Should net about 5psi, maybe 130-135hp?
And for those of you wondering how the PVC pipe held up. Other than the paint coming off where it was clamped. It held up great through a track day, some autocrosses and a fair number of miles.
And here are all the parts that will hopefully be going in tomorrow. A crazy missmash of three different kits. No intercooler for now, I mostly want to get the supercharger installed before the winter to make sure it is working well with the new bearings and such. Gonna run it with a slightly larger than stock pulley (stock for this kit would have been 72.5mm, the one on there is 75 from a BRP MP62 kit as far as I can tell) and make sure all is well. Should net about 5psi, maybe 130-135hp?
And for those of you wondering how the PVC pipe held up. Other than the paint coming off where it was clamped. It held up great through a track day, some autocrosses and a fair number of miles.
#229
owo What's this?
it is a reaaaaaly tight fit with the 1.8 throttle body and inlet kn the supercharger. It fit's, but that extra half inch would be really nice. I will likely move the prop valve and lines over the winter.
Also, whatever the 1.6 throttle body gaskets are made from is the worst substance in the world. It glues itself on and takes a rediculous amount of scraping and gasket remover to get off. Sent about 45min total getting it off the intake manifold...
it is a reaaaaaly tight fit with the 1.8 throttle body and inlet kn the supercharger. It fit's, but that extra half inch would be really nice. I will likely move the prop valve and lines over the winter.
Also, whatever the 1.6 throttle body gaskets are made from is the worst substance in the world. It glues itself on and takes a rediculous amount of scraping and gasket remover to get off. Sent about 45min total getting it off the intake manifold...
#230
This thing makes the absolute best noises ever. Can't wait to have dual throttle bodies and a VTA BOV as well. Should really throw people for a loop.
Now of course there has to be a down side, the clutch is slipping in 5th now... Oh well, I was planning on doing one over the winter.
Having half 1.8 JRSC and half 1.6 Sebring (and a tensioner and pulley from a BRP MP62 kit) makes things fit a little weird. But it all goes together! None of this will cause problems once I put the inter-cooler in and move a few things around. This is why I tossed everything in to run at low boost before winter. Figure out where the problems are and then sort them over winter. Have a few last adjustments to make, then it should be ready for it's debut at the end of season meet.
Also, PVC intake since it was the only thing in the house the right shape. Seems to be working.
#231
Your build reminds me of my na, had a lot of fun in that car!!!
%5BURL=http://s1084.photobucket.com/user/HHammerly/media/SC%2090%20Miata/0F038649-2B11-49FD-B8BA-0DD234BFA6B6-4667-0000072313A7AC2A.jpg.html%5D%5BIMG%5Dhttp://i1084.photobucket.com/albums/j420/HHammerly/SC%2090%20Miata/0F038649-2B11-49FD-B8BA-0DD234BFA6B6-4667-0000072313A7AC2A.jpg%5B/IMG%5D%5B/URL%5D
%5BURL=http://s1084.photobucket.com/user/HHammerly/media/SC%2090%20Miata/0F038649-2B11-49FD-B8BA-0DD234BFA6B6-4667-0000072313A7AC2A.jpg.html%5D%5BIMG%5Dhttp://i1084.photobucket.com/albums/j420/HHammerly/SC%2090%20Miata/0F038649-2B11-49FD-B8BA-0DD234BFA6B6-4667-0000072313A7AC2A.jpg%5B/IMG%5D%5B/URL%5D
#234
As an interesting side note, I have had to turn down all the percentages for my IACV. I guess the breather and valve is less of a restriction or something? I actually have the idle screw in the throttle body closed all the way at the moment. Need to fiddle with this stuff, idle is a bit unstable (not supprising, that is the big known issue with these kits).
Oh, and I really love how the dummy throttle body for the early Sebring kit is CNC hune out of a single chunk of aluminum. Billet throttle manifold!
#235
Senior Member
iTrader: (1)
Join Date: Sep 2011
Location: Lambertville, NJ
Posts: 1,215
Total Cats: 74
Y...
As an interesting side note, I have had to turn down all the percentages for my IACV. I guess the breather and valve is less of a restriction or something? I actually have the idle screw in the throttle body closed all the way at the moment. Need to fiddle with this stuff, idle is a bit unstable (not supprising, that is the big known issue with these kits).
As an interesting side note, I have had to turn down all the percentages for my IACV. I guess the breather and valve is less of a restriction or something? I actually have the idle screw in the throttle body closed all the way at the moment. Need to fiddle with this stuff, idle is a bit unstable (not supprising, that is the big known issue with these kits).
#236
Nevermind this setup is only going to be on the car until they salt, and then it will be out and time to fix up the engine, do the clutch, rerout, intercooler and all that other fun stuff.
#237
Managed to get the picture links to load so I could actually look at them.
Looks like that was a sebring kit like the other kit I have! And glad to see it is possible to rout the intake up and over the brake master rather than under it. I was considering going that rout after shoehorning in the intake pipe.... I have a long way to go before this car is done and where I want it still.
Looks like that was a sebring kit like the other kit I have! And glad to see it is possible to rout the intake up and over the brake master rather than under it. I was considering going that rout after shoehorning in the intake pipe.... I have a long way to go before this car is done and where I want it still.
#239
The crossover pipe is pushed all the way into it since it is already jammed into the radiator fans as is.
For the IACV duty cycles, it is't a ton that I had to lower them. I had to go from 42% to 39% to get back down to 1300ish rpm idle with no load (running open loop idle, so with accesories on it drops down to 900ish).
#240
Elite Member
iTrader: (1)
Join Date: Apr 2014
Location: SF Bay Area, CA
Posts: 3,107
Total Cats: 560
The crossover pipe is what I am talking about, shoved all the way into what?
I agree that IAC value changes are minimal, but the coupler between the SC outlet and crossover pipe still look like a potential leak to me.
I agree that IAC value changes are minimal, but the coupler between the SC outlet and crossover pipe still look like a potential leak to me.