When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Last year I got my NB miata after being out of the Miata game for 6-7 years. I found a great deal on a high mile NB with a horrible missfire. The missfire was due to a spark plug ground electrode literally not existing. Took the NB to Miata's at the gap and realized very quickly that the engine was on its last legs, burned/leaked oil from every orfice in the engine and would shoot coolant out of the overflow tank when driven hard. Not sure what the previous owner did to it, but pretty sure the head gasket was very very tired. Found an amazing deal on a used FM2 turbo kit mostly intact and went ahead and boosted the tired old motor knowing that it probably wouldnt last long. It lasted about 3 months before #1 and #2 cylinders got really low compression readings ( 60, 90 psi respectively ). Engine is making a knocking sound under load that I am going to diagnose when it comes out next week.
Ended up looking like this when we were done, FMII kit, GT2560R, Vibrant IC, Custom IC pipes, Custom exhaust to borla XR1 muffler.
So this is how the car has been sitting for the last couple of months waiting on its new heart transplant. Machine shop took a while and Ive been sourcing parts for it while its been down, shes gonna be happy very soon. Next week its going on the lift, subframe is being dropped and the new engine is going in. The manifold and FM turbine elbow are getting ceramic coated locally and I will update this thread when more parts arrive. Also sourced a Squaretop manifold for her as well.
Progress update, the manifold and turbine elbow are 2000* ceramic coated from a local shop. Hopefully it will hold up, I have used Jethot in the past and it was great I just didnt feel like sending it out, and waiting forever to have them coat it. Made a custom oil drain line with -10 AN fittings. I think it looks pretty nice so far. I have a couple more pics to upload as well, engine is going in the car this week.
Just waiting on my friends lift to free up ( LS7 FD needed some love ) and this engine is going in. Got a squaretop from Harry B , ceramic coated it cast iron grey. PS pump went on as well. Still waiting on the Radium fuel rail and thats the last piece to the puzzle. I was going to use the stock rail but I thought lets go overboard, this typically happens when I build something.
Thinking of doing the same; saves some hassle when adjusting cam timing so you can actually do that on a dyno. Also, you work fast! It should have been only a couple of days the squaretop arrived, right?
Thinking of doing the same; saves some hassle when adjusting cam timing so you can actually do that on a dyno. Also, you work fast! It should have been only a couple of days the squaretop arrived, right?
I believe it showed up last friday, had to drill out the stuck EGR bolt....that was a PITA lol. Thanks for the great deal on the manifold it sure cleaned up nice.
Everyone knows, it's how you stand next to your car, making them wonder how fabulous your hair looks floating in the air while you race it. Remember that.
I couldnt get my VC paint to wrinkle correctly... I think it was too cold. Ima have to sand it down and try again cause mine came out like ***
You want to lay it on really thick. Also come at it from every angle possible, don't just go back and forth in the same pattern. Wrinkle paint needs to be layed on heavy
I did three heavy coats of three.. well coats. I did different angles too. I will retry again now that its warm and not have to leave it in a shed with the heater running