Aidan's loose oily bunghole actually runs a track lap
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Who's your contact at SE Power Systems regarding BW EFR rebuilds? I will be pulling my built VVT out soon and want to send out the turbo while I'm at it so I can get it doubled checked. I keep getting a lot of oil in my through my charge pipe which then goes into my intake manifold and just want to make sure the turbo isn't bad.
-David
-David
Moderator
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/moderator.png)
iTrader: (12)
Join Date: Nov 2008
Location: Tampa, Florida
Posts: 20,885
Total Cats: 3,075
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Lol.
Ryan_G's turbo was leaking oil into the compressor housing. The turbine wheel had some damage and even though the seals checked out in static bench testing, I believe that the imbalance due to the damage likely caused a high speed vibration allowing the oil to pass.
Ryan_G's turbo was leaking oil into the compressor housing. The turbine wheel had some damage and even though the seals checked out in static bench testing, I believe that the imbalance due to the damage likely caused a high speed vibration allowing the oil to pass.
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
It is. They just "trigger" (or whatever you want to call it) backwards from each other. On the manifold end, that is. So if you run a VTCS manifold (ew) and don't change your settings, might actually shut that bad boy in the midrange, which makes for interesting feels.
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Lol.
Ryan_G's turbo was leaking oil into the compressor housing. The turbine wheel had some damage and even though the seals checked out in static bench testing, I believe that the imbalance due to the damage likely caused a high speed vibration allowing the oil to pass.
Ryan_G's turbo was leaking oil into the compressor housing. The turbine wheel had some damage and even though the seals checked out in static bench testing, I believe that the imbalance due to the damage likely caused a high speed vibration allowing the oil to pass.
SADFab Destructive Testing Engineer
![](/mt2011/images_td/ranks/supporter1.gif)
![](/mt2011/images_td/ranks/moderator.png)
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
996 was pretty fun. The 10 year old tires sucked, but the re71s in the afternoon were fun.