Aidan's loose oily bunghole actually runs a track lap
#1044
Supporting Vendor
iTrader: (1)
Join Date: Sep 2010
Location: Lake Forest, CA
Posts: 7,976
Total Cats: 1,018
Do you have a dremel or something with a cutting wheel (or maybe a carefully-wielded sawzall) where you can make a cut top to bottom through the metal bushing liner?
Do you not have a press of some sort? You need one of those HF ball joint presses or something. That's what I used on mine.
Do you not have a press of some sort? You need one of those HF ball joint presses or something. That's what I used on mine.
#1047
That suucks
Mine gave up releasing the pressure on the bottom then on the top side. I used a wire wheel to clean the inside of the diff housing bushings, looks like you might need a bit more than I did!
I've got cheap protane bushings, I hope a propane torch is enough to melt the lower mount rubber off...
Mine gave up releasing the pressure on the bottom then on the top side. I used a wire wheel to clean the inside of the diff housing bushings, looks like you might need a bit more than I did!
I've got cheap protane bushings, I hope a propane torch is enough to melt the lower mount rubber off...
#1054
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
I'll make one of those. Going to the drag strip at woodburn on Sunday. Ed you should come in the s2k with a for sale sign on it. Its Some huge import car show
#1057
Cpt. Slow
iTrader: (25)
Join Date: Oct 2005
Location: Oregon City, OR
Posts: 14,360
Total Cats: 1,184
It has zero tabs. There's a ~$100 shipped kit (ISC?) that turns it into an NB subframe, with front and rear tabs. Also has a backing plate with a giant nut welded to it so you could attach the entire NB ladder brace from the rear. The shiny black piece in this pic:
I have one for sale if you want it Doesn't attach to the PPF, but it does connect the dangling subframe to the chassis to really box it in.
I have one for sale if you want it Doesn't attach to the PPF, but it does connect the dangling subframe to the chassis to really box it in.