Aidan's loose oily bunghole actually runs a track lap
#5121
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Now its a real community build thread!
Everyone can edit!
https://docs.google.com/spreadsheets...it?usp=sharing
Everyone can edit!
https://docs.google.com/spreadsheets...it?usp=sharing
#5127
I used to see shops for sale pretty often, 9 times of ten they are busted up and auctioned off. The customer log isn't ever worth what they think it is. It's part of the reason I moved on from my last job, boss man made it big and checked out. Basically told me verbatim he gave zero ***** any more, and would sell out or even break the whole lot up for the right price. Fishing, hunting, and golf 5 days a week.
Right price never came, but lots of his business isn't his business any more.
Check practical machinist forum for bunches of old grouchy machinists/shop owners. Don't post, because they're worse than we are when it comes to tolerating general stupidity from lack of experience, but it's a massive lot of serious machining experience.
#5128
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Money no object/winning the lottery I would love to move to a middle of nowhere town and run my own machine shop. I just know I wouldn't be profitable.
#5129
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Ordered the pressure sensors linked earlier.
Will be connected to Second EGO and JS4. Second EGO requires no conditioning, JS4 will use this circuit:
I will also build the circuit for JS5 (pullup for oil temp)
CANH/L, Flex, JS4/5, Second EGO, Ext Map, Spare ADC, PT4, Vref, Spare GNDs, will be pulled to my spare output connector. I'm running out of room in there so hopefully I can get this all out.
Will be connected to Second EGO and JS4. Second EGO requires no conditioning, JS4 will use this circuit:
I will also build the circuit for JS5 (pullup for oil temp)
CANH/L, Flex, JS4/5, Second EGO, Ext Map, Spare ADC, PT4, Vref, Spare GNDs, will be pulled to my spare output connector. I'm running out of room in there so hopefully I can get this all out.
#5130
Elite Member
iTrader: (3)
Join Date: Apr 2014
Location: Huntington, Indiana
Posts: 2,885
Total Cats: 616
Don't be so sure.
You just need to find the right clients.
The orthopaedics company I work for is in a relatively small town, and it and the two other major ones are worth Billions (B capitalized on purpose).
We have in house machine shops, but they can's always keep up with demand, and lots of work gets outsourced.
Just find the industry, and the work will follow.
You just need to find the right clients.
The orthopaedics company I work for is in a relatively small town, and it and the two other major ones are worth Billions (B capitalized on purpose).
We have in house machine shops, but they can's always keep up with demand, and lots of work gets outsourced.
Just find the industry, and the work will follow.
#5131
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
I should have clarified. Its not the machine shop I'm worried about. Its the machinist
@18psi
You used the map sensor I'm looking at years ago on your adaptronic. Any issues ever? (besides the wrong pinout?)
https://www.miataturbo.net/diy-turbo...s-again-32729/
@18psi
You used the map sensor I'm looking at years ago on your adaptronic. Any issues ever? (besides the wrong pinout?)
https://www.miataturbo.net/diy-turbo...s-again-32729/
#5133
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Alright I think I'll get it.
I'll run it as the baro sensor for a while, see what happens. Also I can set up a MAP sensor check on the MS that will put the car into limp mode if it drops too fast or goes flat. So I can log how fast it drops in normal operation and set those parameters.
They are all built on the same actual freescale processor, its just the housing.
I'll run it as the baro sensor for a while, see what happens. Also I can set up a MAP sensor check on the MS that will put the car into limp mode if it drops too fast or goes flat. So I can log how fast it drops in normal operation and set those parameters.
They are all built on the same actual freescale processor, its just the housing.
#5134
Don't be so sure.
You just need to find the right clients.
The orthopaedics company I work for is in a relatively small town, and it and the two other major ones are worth Billions (B capitalized on purpose).
We have in house machine shops, but they can's always keep up with demand, and lots of work gets outsourced.
Just find the industry, and the work will follow.
You just need to find the right clients.
The orthopaedics company I work for is in a relatively small town, and it and the two other major ones are worth Billions (B capitalized on purpose).
We have in house machine shops, but they can's always keep up with demand, and lots of work gets outsourced.
Just find the industry, and the work will follow.
Zimmer? Stryker? Biomet? Or a smaller company?