Aidan's loose oily bunghole actually runs a track lap
#3482
SadFab CEO
iTrader: (3)
Join Date: Sep 2012
Location: your mom's house phoenix, AZ
Posts: 4,560
Total Cats: 1,142
this has been in my shopping cart for months now
10mm 3 8" Aluminium One Way Non Return Check Valve Petrol Diesel Water Oil CV | eBay
10mm 3 8" Aluminium One Way Non Return Check Valve Petrol Diesel Water Oil CV | eBay
#3487
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Does the engine not pull enough vacuum to open it?
<br />Check valve acts as PCV. I tried the one you got, and it didn't work for me.
<br />Check valve did.
<br />Check valve acts as PCV. I tried the one you got, and it didn't work for me.
<br />Check valve did.
#3491
I disagree!
A PCV is inherently a check valve, if it don't check valve, it needs to be replaced.
Any other check valve in the way will mess with PCV action, it's sized and weighted with a certain spring for the reasons Sean is finding out. I was considering it but I don't have issues so I don't bother, If I opened up valve cover ports I know for a fact it'd be unnecessary.
With them new rings I'd be upset if I were popping the dipstick with only this PCV valve.
A PCV is inherently a check valve, if it don't check valve, it needs to be replaced.
Any other check valve in the way will mess with PCV action, it's sized and weighted with a certain spring for the reasons Sean is finding out. I was considering it but I don't have issues so I don't bother, If I opened up valve cover ports I know for a fact it'd be unnecessary.
With them new rings I'd be upset if I were popping the dipstick with only this PCV valve.
#3493
I haven't wanted to pull the dash yet, I'm waiting till I'm ready to rework my wiring harness. I plan to use one of those pass thru bulkhead connectors, so the dash will need to be out.
I didn't know you could still get the pipe though, I think someone offered me one for $30 the other day, and I said screw that. $15 is better, I like $15.
I didn't know you could still get the pipe though, I think someone offered me one for $30 the other day, and I said screw that. $15 is better, I like $15.
#3494
I haven't wanted to pull the dash yet, I'm waiting till I'm ready to rework my wiring harness. I plan to use one of those pass thru bulkhead connectors, so the dash will need to be out.
I didn't know you could still get the pipe though, I think someone offered me one for $30 the other day, and I said screw that. $15 is better, I like $15.
I didn't know you could still get the pipe though, I think someone offered me one for $30 the other day, and I said screw that. $15 is better, I like $15.
Does the NA dash have to come out to get the evaporator out? On my NB it only required pulling the glove box and the little metal bracket that goes across underneath it.
--Ian
#3497
Elite Member
iTrader: (37)
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,448
Total Cats: 1,901
Its seriously tons of room. Plus the holes in the firewall where the AC used to run make great openings for wire runs.
I got mine from Rosenthal, it came with the rubber plugs as well. It wasn't $15 though.
I got mine from Rosenthal, it came with the rubber plugs as well. It wasn't $15 though.
#3499
Elite Member
iTrader: (37)
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,448
Total Cats: 1,901
Its totally worth it. It radically increases the volume of air through the vent system. If you don't have AC, this is pretty much required if you want airflow.
FWIW Rosenthal lists the one part number for 90-05
FWIW Rosenthal lists the one part number for 90-05
#3500
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
<p>I cannot stress the amount of room it gives you.</p><p>You could fit hustlers entire ***** collection up there, and still have room for some of Vlads.</p>