Aidan's loose oily bunghole actually runs a track lap
#3264
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
<p>@deezums @hi_im_sean what are we doing for centering rings. Did we find pre-made aftermarket ones? Or are we making our own.</p>
#3265
SadFab CEO
iTrader: (3)
Join Date: Sep 2012
Location: your mom's house phoenix, AZ
Posts: 4,560
Total Cats: 1,142
Community build thread...Aidan rambles on and on...
I havnt looked... deezums? Unless he finds a cheap easy offering I'll just make them. Give me the od, id and width and I'll knock some out and send them to you for testing.
#3266
SadFab CEO
iTrader: (3)
Join Date: Sep 2012
Location: your mom's house phoenix, AZ
Posts: 4,560
Total Cats: 1,142
The size we need, for the fronts anyway, arnt very common. 54.1 to 64.1
these guys have them, but in sets of 4.
Hub Rings / Spigot Rings for Wheels from USA $6.25 / pcs - HubCentric-Rings.com
plastic, stupid $$$ for what they are, again in sets of 4
Hub Centric Rings ( 54.1 - 64.1 ) - JustForWheels.com
you could be on ebay for a while sorting through them all
these guys have them, but in sets of 4.
Hub Rings / Spigot Rings for Wheels from USA $6.25 / pcs - HubCentric-Rings.com
plastic, stupid $$$ for what they are, again in sets of 4
Hub Centric Rings ( 54.1 - 64.1 ) - JustForWheels.com
you could be on ebay for a while sorting through them all
#3268
Elite Member
iTrader: (37)
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,448
Total Cats: 1,901
I did not. I did offer to loan you my M-Tuned ones for design purposes but you opted out?
wat.
You young kids and your fancy designer drugs, back in my day all we had was weed and alcohol and we got along just fine.
You young kids and your fancy designer drugs, back in my day all we had was weed and alcohol and we got along just fine.
#3269
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Prescription since 3rd grade here. Back when they actually used a small amount of discretion when handing the **** out. I'm nonfunctional without it, my brain doesn't know how to focus.
<br />
<br />Guess I'm hunting for brackets. Hope I can find some.
<br />
<br />Guess I'm hunting for brackets. Hope I can find some.
#3273
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
<p>Good thing I'm a software guy, my hands are just too shakey.</p><p>Should i get those rings sean? Or would it be cheaper to have you make and mail them.</p>
#3276
I have oshpark SMT toaster oven, used to laser cut solder masks. Solder paste is too ******* expensive and dies too easy, do not like. The toaster was only $40 bucks though, so there's that.
I bought $15 hubcentric rings on ebay, from Lithuania!
Rings needs to be 54.1 to 64.1 as previously mentioned, I bought 54.1 to 64.0 because it's cheaper. They need to be 6mm thick, I'll turn these down if necessary. My lathe uses 16C collets standard, for me to turn rings I have to remove the collet nose and stick a chuck on, trying to avoid that..
Hub Centric Rings Alloy Wheels Spigot Rings Centre Rings 64 0 54 1 64 0 54 1 | eBay
No, no aluminum necessary.
I bought $15 hubcentric rings on ebay, from Lithuania!
Rings needs to be 54.1 to 64.1 as previously mentioned, I bought 54.1 to 64.0 because it's cheaper. They need to be 6mm thick, I'll turn these down if necessary. My lathe uses 16C collets standard, for me to turn rings I have to remove the collet nose and stick a chuck on, trying to avoid that..
Hub Centric Rings Alloy Wheels Spigot Rings Centre Rings 64 0 54 1 64 0 54 1 | eBay
No, no aluminum necessary.