|
They go on top, cover that bit of trim seen in the last picture.
They don't cover that rubber piece you just cleaned |
1 Attachment(s)
Originally Posted by curly
(Post 1102654)
They go on top, cover that bit of trim seen in the last picture.
They don't cover that rubber piece you just cleaned https://www.miataturbo.net/attachmen...ine=1392485341 |
I was SOOOO going to take a picture to help you out. Got to be quick in this thread though. LOL.
|
Originally Posted by hornetball
(Post 1102680)
I was SOOOO going to take a picture to help you out. Got to be quick in this thread though. LOL.
And I used to think mine were in decent shape :bang: |
oof thank you for that. Those drawn part diagrams are hard to see sometimes.
Now I need to track down that unique bolt some where. I can't remember the last time I've seen it. |
You can use any m6 bolt, those are just for the soft top cover. That
You're not using, right? |
Yeah, those snaps are only for the tonneau. Otherwise, just use a regular interior screw. Same as the ones for the center console.
|
I am not using the soft top, so that is perfect. I did find the soft top bolts but I'll just sink a screw in instead.
Can you guys get me a shot of the top view? It fits fine when I install the metal bracket on top of the rubber but it is too tight for the bolts to align properly when I try to lay the rubber on top of the metal. Or I should say the rubber won't align properly with the 2 plastic fasteners, and the "grooves" don't seem to snap into place. Sorry guys, I have been awake for 50 hours so maybe I am just mentally broken. |
1 Attachment(s)
|
This^^^
Dude! Don't harm yourself. Project will still be there when you wake up. Promise. |
10 Attachment(s)
Originally Posted by turbofan
(Post 1102707)
Jeff,
Go to sleep you dumbass So the sleep thing has not been in regards to the car. I just couldn't sleep. Here is what has been done today. Decided I wanted to put the seat belts back in the car but I guess is classic me fashion I couldn't just simply put them back in the car. When I went to put them back in I noticed just how gnarly and dirty the belts were. The rubber boots around the female connectors were scratched to hell, and the male connectors were the same. Decided to clean 25 years of "laps" out of the belts. This was an exercise in holding back some dry heaving due to how much filth came out of the belt fabric. All laid out and ready to go. The nice things about 2 cars is you can pick the best parts of the two. All the "painted picture are after a massive amount of sanding and melting. Plastic sucks to sand. https://www.miataturbo.net/attachmen...ine=1392509169 Letting the degreaser/plastic cleaner soak in https://www.miataturbo.net/attachmen...ine=1392509169 This is just from dipping my brush into some water to create suds. Epic amounts of brown goo came out of the fabric....Mostly due to my steam cleaner. Steam cleaners make these jobs easy. https://www.miataturbo.net/attachmen...ine=1392509169 https://www.miataturbo.net/attachmen...ine=1392509169 all clean https://www.miataturbo.net/attachmen...ine=1392509169 Cleaned the plastic shrouds up. Top is clean bottom is how they looked https://www.miataturbo.net/attachmen...ine=1392509169 Rubber shrouds for female connector. Before https://www.miataturbo.net/attachmen...ine=1392509169 after https://www.miataturbo.net/attachmen...ine=1392509169 Female connector repainted. As you can tell from the one on the left, they were pretty bad. I just used a red sharpie to recolor the "press" button. I'll buy some real red paint later when I can find a good red that I like. https://www.miataturbo.net/attachmen...ine=1392509169 Currently trying to find what fabric dye will adhere to the seat belt fabric. Some parts of the seat belt are pretty faded and puke green in color. I did a test strip on the seat belts I'm not using and it helped a little but it simply wouldn't penetrate the fibers. Might be due to the fact that it isn't clean at all. |
Oh god sleep has never felt so good all 15 hours of it. Time to get this oil pan done and get going on putting the engine in.
Are there any parts you guys would recommend putting in the engine bay before dropping the engine in? Just trying to think of some. Maybe install the PPF onto the diff? |
Jeff will study and research to find the exact perfect red for the buttons on his seatbelt to obtain the proper feng shui in his cabin.
Again -- you're insane man. Also: that seatbelt restoration is beyond epic. They look like new again. Your car is going to be so, so, so, so awesome. |
For a little more snugness, you can eliminate those plastic covers and their little metal inserts.
|
Originally Posted by curly
(Post 1102840)
For a little more snugness, you can eliminate those plastic covers and their little metal inserts.
*edit* wouldn't that make the female end fall down under the seat without the cover making it stiff. |
Not really. On a stock seat at least, the bolster is too close to the tranny tunnel. Even without carpet I tuck mine between there to keep from sitting on it or rattling around in the case of the passenger side.
|
6 Attachment(s)
Originally Posted by curly
(Post 1102857)
Not really. On a stock seat at least, the bolster is too close to the tranny tunnel. Even without carpet I tuck mine between there to keep from sitting on it or rattling around in the case of the passenger side.
Finished up the seat belts...kinda. The adhesive got too sticky sitting in the sun so it pulled some of the black off the female connector, so I need to redo it. The red turned out great on the button though. https://www.miataturbo.net/attachmen...ine=1392589556 Took the rust off the seat belt tab. https://www.miataturbo.net/attachmen...ine=1392589556 And painted the buckle and the seat belt stopper. https://www.miataturbo.net/attachmen...ine=1392589556 And as far as I will take polishing the oil pan. I hate wire wheeling with a passion. https://www.miataturbo.net/attachmen...ine=1392589556 https://www.miataturbo.net/attachmen...ine=1392589556 https://www.miataturbo.net/attachmen...ine=1392589556 |
Jeff where did you get the new sealed bearing for the alternator? Mine started squeaking recently and I might try to clean it up before I resort to getting a new one.
|
2 Attachment(s)
Originally Posted by BTMiata
(Post 1102878)
Jeff where did you get the new sealed bearing for the alternator? Mine started squeaking recently and I might try to clean it up before I resort to getting a new one.
Got the carpet put in. Damn that took a lot of massaging with all the sound deadening I put in. Saying that, once I did, it fits and looks great. I was going to put the seat belts in but the ROLL BAR makes it too narrow to put in its hole. I really don't want to remove the roll bar to put them in. Laziness makes me want to roll with just my race harness.:crx: https://www.miataturbo.net/attachmen...ine=1392600021 https://www.miataturbo.net/attachmen...ine=1392600021 |
All that work on the seat belt though! Should of warned you about the roll bar, surprised no one caught that...
|
| All times are GMT -4. The time now is 02:17 AM. |
© 2024 MH Sub I, LLC dba Internet Brands