random question: are you controlling the vics switchover?
|
I have it wired into the DIYBOB on my MS3x but I have no clue if it is functioning properly. Probably should data log to see if it is kicking in or not.
|
Jeff, this was my experience using an MS1-based MSPNP for VICS:
https://www.miataturbo.net/mspnp-55/...in-vics-78874/ Datalogging works great and led to my discovering a "feature" of the MS1 software (see the thread). I also did a physical observation test of the VICS actuator. When I did that, I lowered the setpoint (2K RPM IIRC) and then went around and manipulated the throttle under the hood. Above the setpoint, the VICS arm should be in its resting position (same place as when the car is off). Below the setpoint, the VICS arm should be in its actuated position. |
Set to 2000rpm. Look at butterflys. Blip throttle by hand. Do butterflys move? It's working.
Set to 5500rpm until you hit the dyno again. You want two dyno graphs, one with it set to ~1000rpm, one with it set to ~10,000rpm (always off, always on). In my experience, N/A motors like it open(closed?!) between 3500 and 5500rpm. Turbo motors don't really seem to care... |
yep 5500 seems to be the sweet spot. the valves should be closed below and open above. default "resting" position is open. vacuum should close them as soon as you start the car
iirc |
You know, I've always wondered if it even does much with a car that has a turbo. Wouldn't a square top manifold suit it a little better?
|
No, doesn't do much on a boosted car -- better off with a squaretop (or just turn up the boost a little).
|
Yeah the flattop is likely the best oem option.
I really don't know about if it matters in boost, I keep hearing conflicting info |
Originally Posted by Jeffbucc
(Post 1241209)
You know, I've always wondered if it even does much with a car that has a turbo. Wouldn't a square top manifold suit it a little better?
|
You know you WANT IT . . . .
|
gold plated with inconel fasteners, of course
and EGR block off plates cut from solid diamonds Like a Jeff |
Originally Posted by hornetball
(Post 1241259)
You know you
|
Oh, lookie here... https://www.miataturbo.net/miata-par...1-8-svt-84196/ :giggle:
|
Seriously awesome prices on those lately
|
Send me your VICS after you buy the flattop. You have my address :)
|
I'm pretty happy with my manifold thank you!
Plus I'd not like to go through the hassle of Powdercoating it, buying gaskets, running vacuum lines, yadda yadda for a tiny inestimable gain. Sorry y'all maybe another week you'll get to see the next episode in how Jeff goes overboard. |
Originally Posted by aidandj
(Post 1241279)
Send me your VICS after you buy the flattop. You have my address :)
|
WTF? Where's Jeff?
|
Originally Posted by Jeffbucc
(Post 1241282)
I'm pretty happy with my manifold thank you!
Originally Posted by Jeffbucc
(Post 1241282)
Plus I'd not like to go through the hassle of Powdercoating it, buying gaskets, running vacuum lines, yadda yadda for a tiny inestimable gain.
Originally Posted by Jeffbucc
(Post 1241282)
Sorry y'all maybe another week you'll get to see the next episode in how Jeff goes overboard.
|
Don't bother him with this oem peasantry. He's going IRTB's
|
All times are GMT -4. The time now is 02:19 AM. |
© 2024 MH Sub I, LLC dba Internet Brands