Adaptronic with VVT
#1
Senior Member
Thread Starter
iTrader: (3)
Join Date: Dec 2009
Location: Louisville, KY
Posts: 587
Total Cats: 99
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I was wondering if anyone has gotten adaptronic to run VVT very well yet. Searching through the forum it looks like most people are having trouble. I wanted to know how much of a pain it will be if I go this route
#14
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
So is it as simple as turning on the output and then go for a drive? Is there any risk of messing my **** up? Now I am frightened!!!
Thanks for pointing this out!!!!
Cheers,
Matt
#15
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Wow, that is strange... I thought it was working since whenever I run a log it showed movement in the VVT column.... but if that is the case... I guess I have more to do!
So is it as simple as turning on the output and then go for a drive? Is there any risk of messing my **** up? Now I am frightened!!!
Thanks for pointing this out!!!!
Cheers,
Matt
So is it as simple as turning on the output and then go for a drive? Is there any risk of messing my **** up? Now I am frightened!!!
Thanks for pointing this out!!!!
Cheers,
Matt
I am trying to fine tune this part yet. BTW If you turn on the VVT on the 3# auxout, you should see something like this:
![Name: normal.png
Views: 182
Size: 10.0 KB](https://www.miataturbo.net/attachments/adaptronic-63/202055d1501245225-adaptronic-vvt-normal.png)
Don't forget to set "Ref 1 (º)" box in the special functions tab. The default value is 85, I had to add 10º because it's 10º advanced when it supposely must be 0º
#16
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
What you have seen in the logs is the vvt target, look at the "VVT Duty" and "VVT (º)".
I am trying to fine tune this part yet. BTW If you turn on the VVT on the 3# auxout, you should see something like this:
![](http://i645.photobucket.com/albums/uu174/ismael_pt/normal.png)
Don't forget to set "Ref 1 (º)" box in the special functions tab. The default value is 85, I had to add 10º because it's 10º advanced when it supposely must be 0º
I am trying to fine tune this part yet. BTW If you turn on the VVT on the 3# auxout, you should see something like this:
![](http://i645.photobucket.com/albums/uu174/ismael_pt/normal.png)
Don't forget to set "Ref 1 (º)" box in the special functions tab. The default value is 85, I had to add 10º because it's 10º advanced when it supposely must be 0º
![Laugh](https://www.miataturbo.net/images/smilies/laugh.gif)
Thanks for all the help!
Cheers,
Matt
#18
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Auxout3: check the PWM box and select 200Hz from the drop-down menu on the left.
VVT Target map: you can use the default value, it's not bad. But the best way to achieve more hp is to tune vvt on a dyno. Maybe some y8s words of wisdom are needed here.
GF/wife pic: Does she have a sister?
![Giggle](https://www.miataturbo.net/images/smilies/gay.gif)