Hi!
#1
Elite Member
Thread Starter
iTrader: (2)
Join Date: Sep 2008
Location: Central Florida
Posts: 2,799
Total Cats: 179
![Talking](https://www.miataturbo.net/images/icons/icon10.gif)
Hi, new guy here. My Miata is slow. I love lamp. 1st post complete.
Am I doing it right?
I am:
Previous modified cars include several DSMs, an Evo8 and a C5 that were all compromised "only cars." My current car is a '94 that was purchased with the intention of becoming a fairweather-slash-track car. Ideally, I'm looking for something like where Hustler has his car now - able to reliably drive a few hours to a track event towing a tire trailer, swap on some R-comps, lap all day then drive home.
I'll put up a few pictures in the next post.
Am I doing it right?
I am:
- here to do more reading than posting
- approaching the point where I need to get serious about the future direction of my project
- not a broke college kid
- not a slamburglar
- not interested in all season tires and stock ride height
- not looking to reinvent the proverbial wheel
Previous modified cars include several DSMs, an Evo8 and a C5 that were all compromised "only cars." My current car is a '94 that was purchased with the intention of becoming a fairweather-slash-track car. Ideally, I'm looking for something like where Hustler has his car now - able to reliably drive a few hours to a track event towing a tire trailer, swap on some R-comps, lap all day then drive home.
I'll put up a few pictures in the next post.
#2
Elite Member
Thread Starter
iTrader: (2)
Join Date: Sep 2008
Location: Central Florida
Posts: 2,799
Total Cats: 179
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Most recent exterior shot (after rust repair and a peeling front bumper cover):
![Name: 2009-12-26BDGR.jpg
Views: 56
Size: 49.0 KB](https://www.miataturbo.net/attachments/meet-greet-40/192233d1501226362-hi-2009-12-26bdgr.jpg)
I have since added APR carbon fiber mirrors, but it's otherwise the same.
Most recent interior shot:
![Name: DSC03888.jpg
Views: 47
Size: 101.5 KB](https://www.miataturbo.net/attachments/meet-greet-40/192234d1501226362-hi-dsc03888.jpg)
I have since added a short center console. Up next will be a rollbar with harness (and eventually two seats capable of supporting 6-points). I am also removing the headunit for an MP3 player-based system (mini-amp + door speakers + iPhone).
![Name: 2009-12-26BDGR.jpg
Views: 56
Size: 49.0 KB](https://www.miataturbo.net/attachments/meet-greet-40/192233d1501226362-hi-2009-12-26bdgr.jpg)
I have since added APR carbon fiber mirrors, but it's otherwise the same.
Most recent interior shot:
![Name: DSC03888.jpg
Views: 47
Size: 101.5 KB](https://www.miataturbo.net/attachments/meet-greet-40/192234d1501226362-hi-dsc03888.jpg)
I have since added a short center console. Up next will be a rollbar with harness (and eventually two seats capable of supporting 6-points). I am also removing the headunit for an MP3 player-based system (mini-amp + door speakers + iPhone).
#12
Elite Member
Thread Starter
iTrader: (2)
Join Date: Sep 2008
Location: Central Florida
Posts: 2,799
Total Cats: 179
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I assume you saw the rest of the Photobucket. For those that didn't, here's an example of the rocker damage:
![Name: BDGR_Rust_07_640x480.jpg
Views: 66
Size: 48.1 KB](https://www.miataturbo.net/attachments/meet-greet-40/192222d1501226349-hi-bdgr_rust_07_640x480.jpg)
And the front fascia:
![Name: 2010-02-21_StockNABumper_02.jpg
Views: 46
Size: 44.0 KB](https://www.miataturbo.net/attachments/meet-greet-40/192223d1501226349-hi-2010-02-21_stocknabumper_02.jpg)
I had a body shop do the repair work.
If it stays naturally aspirated long-term, it's because I decided to sell it.
I went so far as to buy a used factory exhaust to replace my damaged/shitty looking rear section rather than put on anything that will make it louder - not because I am averse to loud cars, but because I am averse to loud, slow, naturally aspirated four-cylinder cars.
I am currently at the "serious planning" (as opposed to vague daydreaming) stage with the car and deciding on whether or not it makes sense to move forward with the platform or replace it with something else. See this thread here.
![Name: BDGR_Rust_07_640x480.jpg
Views: 66
Size: 48.1 KB](https://www.miataturbo.net/attachments/meet-greet-40/192222d1501226349-hi-bdgr_rust_07_640x480.jpg)
And the front fascia:
![Name: 2010-02-21_StockNABumper_02.jpg
Views: 46
Size: 44.0 KB](https://www.miataturbo.net/attachments/meet-greet-40/192223d1501226349-hi-2010-02-21_stocknabumper_02.jpg)
I had a body shop do the repair work.
If it stays naturally aspirated long-term, it's because I decided to sell it.
![wink](https://www.miataturbo.net/images/smilies/wink.gif)
I am currently at the "serious planning" (as opposed to vague daydreaming) stage with the car and deciding on whether or not it makes sense to move forward with the platform or replace it with something else. See this thread here.
#15
Elite Member
Thread Starter
iTrader: (2)
Join Date: Sep 2008
Location: Central Florida
Posts: 2,799
Total Cats: 179
![Arrow](https://www.miataturbo.net/images/icons/icon2.gif)
Thanks for the compliments, folks.
I got a bit of a deal on the body work and used these patch panels to simplify the process. The rust was fixed at the same time as the front bumper cover went on and I asked for a "ten foot paintjob" to keep costs down, with the intent of eventually having an entire respray done.
I wouldn't know; I live in Florida.
I don't daily drive the car and, by the time it got cold (the last week), I had removed the head unit.
Also, I have the exact same cd player, does yours quit working when it gets cold?
![big grin](https://www.miataturbo.net/images/smilies/biggrin.gif)
#16
Elite Member
Thread Starter
iTrader: (2)
Join Date: Sep 2008
Location: Central Florida
Posts: 2,799
Total Cats: 179
![Post](https://www.miataturbo.net/images/icons/icon1.gif)
For reference, since I don't have a build thread per se, the car currently has:
- stock power other than a JR cat that came with the car (including paper air filter)
- Enkei RPF1 15x7" with 205/50-15 Kumho XS
- TEIN Basics with NB upper mounts (I wanted something matched, complete and without adjustability)
- RB tubular front ARB [edit: with mounting blocks and brace]
- no rear ARB
- OE-replacement rotors, Carbotech AX6 pads, braided lines RBF600 fluid
- ACT organic clutch, FM 13lb flywheel
- very minor weight reduction (no airbags, no soft top, but does have all bumpers, all the airbag sensors, all sound deadening and carpet, etc)
- open diff
- basic maintenance done after I first picked it up (timing belt, water pump, plugs, wires, etc)
Last edited by Scrappy Jack; 12-17-2010 at 05:03 PM.