94R Build - pic intensive
#1
Junior Member
Thread Starter
iTrader: (7)
Join Date: May 2007
Location: Socal
Posts: 332
Total Cats: 0
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
This is how I bought the car:
![](https://lh3.ggpht.com/_u_Fa91MHhi4/SltnFcJqTJI/AAAAAAAABEI/fwLYO5VmuGs/s800/CIMG3374.jpg)
Stock except for wheels, JR racing intake, AGX Shocks, and RB front sway bar.
Then I bought a twinscrew supercharged 01 SE miata for parts:
![](https://lh4.ggpht.com/_u_Fa91MHhi4/SrqyYBe5eNI/AAAAAAAABwk/zduANXZJzyA/s800/IMG00006-20090614-1624.jpg)
Here is what I've done so far:
![](http://farm3.static.flickr.com/2647/4105667603_444e1b82d2_b.jpg)
Changed the suspension out to Koni Yellows, Flyin' Miata Springs, FCM Bumpstops, and top mounts. Replaced the kosei's with 16" OEM SE Enkei's. With the springs at the bottom perch, current ride height is 11.5F/12R. Got a performance alignment:
2.3F/2.3R camber
Slight toe out front, slight tow in rear
Max caster
Close up of the "Enkei":
![](http://farm5.static.flickr.com/4003/4241728943_0b0b323ee2.jpg)
Interior shot: Includes NB nardi wheel, kenwood ipod player, NB chrome vent rings, miata cage shiftknob. Disregard the red seats, they are replaced with eBay Brides.
![](http://farm5.static.flickr.com/4050/4242495356_24f05bed3b_b.jpg)
iPhone in armrest:
![](http://farm5.static.flickr.com/4045/4242497186_9fe815bfd2.jpg)
NB SE pedals bolted on:
![](http://www.flickr.com/photos/38371136@N05/4242510166/sizes/m/)
![](http://farm5.static.flickr.com/4022/4242510166_9970d7bd2f.jpg)
Intake shot (turbo coming soon
):
![](http://farm3.static.flickr.com/2485/4242511498_def7d4537b.jpg)
Installed:
shorty antenna from napa, $10 bucks:
![](http://farm3.static.flickr.com/2779/4242488998_82c388141f.jpg)
NB chrome gas lid:
![](http://farm5.static.flickr.com/4044/4242490316_a5691cf878.jpg)
I bought m-edition sill plates in ROUGH shape. 3M was having a sale on their CF material wrap so this is the result:
![](http://farm5.static.flickr.com/4044/4242493666_87c43cc401_b.jpg)
lamin-X turn signal covers:
![](http://farm5.static.flickr.com/4005/4439673612_c0da88b627_b.jpg)
Bride knockoffs:
![](http://farm5.static.flickr.com/4066/4439675158_02ed152dd4_b.jpg)
ghey stickers:
![](http://farm5.static.flickr.com/4036/4439677842_1de52f28da_b.jpg)
glamor photo:
![](http://farm5.static.flickr.com/4022/4439042429_aefb8f5cec_b.jpg)
Here's some parts that are going on soon:
![](http://farm5.static.flickr.com/4028/4241692341_59e3aa3e55_b.jpg)
Bossfrog clearview rollbar:
![](http://farm5.static.flickr.com/4066/4241730393_17e8b8b671.jpg)
New Stainless Steel Begi S4 tubular manifold:
![](http://i181.photobucket.com/albums/x71/speedf50R/PA252210.jpg)
![Name: PA252211.jpg
Views: 226
Size: 60.7 KB](https://www.miataturbo.net/attachments/build-threads-57/199326d1501240130-94r-build-pic-intensive-pa252211.jpg)
New Begi Stainless Steel Separated Gasses Downpipe w/ O2 Bung and flexpipe:
![Name: PA252212.jpg
Views: 232
Size: 53.5 KB](https://www.miataturbo.net/attachments/build-threads-57/199327d1501240130-94r-build-pic-intensive-pa252212.jpg)
![Name: PA252213.jpg
Views: 245
Size: 51.8 KB](https://www.miataturbo.net/attachments/build-threads-57/199328d1501240130-94r-build-pic-intensive-pa252213.jpg)
K&N intake filter and inlet tube:
![Name: PA252214.jpg
Views: 213
Size: 54.3 KB](https://www.miataturbo.net/attachments/build-threads-57/199329d1501240130-94r-build-pic-intensive-pa252214.jpg)
Begi heatshield:
![Name: PA252216.jpg
Views: 259
Size: 51.1 KB](https://www.miataturbo.net/attachments/build-threads-57/199330d1501240130-94r-build-pic-intensive-pa252216.jpg)
Megasquirt DIYPNP:
![](http://farm3.static.flickr.com/2747/4283198845_f85e87fb75_b.jpg)
![](http://farm5.static.flickr.com/4067/4283940966_306f69687a.jpg)
Flyin' Miata 10.3 lb flywheel:
![](http://farm5.static.flickr.com/4065/4287130850_bf8a496727.jpg)
and no pictures but a used SR20 GT2560 turbo, eBay intercooler piping and intercooler.
Still need stainless steel lines, fittings, ect.
![](https://lh3.ggpht.com/_u_Fa91MHhi4/SltnFcJqTJI/AAAAAAAABEI/fwLYO5VmuGs/s800/CIMG3374.jpg)
Stock except for wheels, JR racing intake, AGX Shocks, and RB front sway bar.
Then I bought a twinscrew supercharged 01 SE miata for parts:
![](https://lh4.ggpht.com/_u_Fa91MHhi4/SrqyYBe5eNI/AAAAAAAABwk/zduANXZJzyA/s800/IMG00006-20090614-1624.jpg)
Here is what I've done so far:
![](http://farm3.static.flickr.com/2647/4105667603_444e1b82d2_b.jpg)
Changed the suspension out to Koni Yellows, Flyin' Miata Springs, FCM Bumpstops, and top mounts. Replaced the kosei's with 16" OEM SE Enkei's. With the springs at the bottom perch, current ride height is 11.5F/12R. Got a performance alignment:
2.3F/2.3R camber
Slight toe out front, slight tow in rear
Max caster
Close up of the "Enkei":
![](http://farm5.static.flickr.com/4003/4241728943_0b0b323ee2.jpg)
Interior shot: Includes NB nardi wheel, kenwood ipod player, NB chrome vent rings, miata cage shiftknob. Disregard the red seats, they are replaced with eBay Brides.
![](http://farm5.static.flickr.com/4050/4242495356_24f05bed3b_b.jpg)
iPhone in armrest:
![](http://farm5.static.flickr.com/4045/4242497186_9fe815bfd2.jpg)
NB SE pedals bolted on:
![](http://farm5.static.flickr.com/4022/4242510166_9970d7bd2f.jpg)
Intake shot (turbo coming soon
![Giggle](https://www.miataturbo.net/images/smilies/gay.gif)
![](http://farm3.static.flickr.com/2485/4242511498_def7d4537b.jpg)
Installed:
shorty antenna from napa, $10 bucks:
![](http://farm3.static.flickr.com/2779/4242488998_82c388141f.jpg)
NB chrome gas lid:
![](http://farm5.static.flickr.com/4044/4242490316_a5691cf878.jpg)
I bought m-edition sill plates in ROUGH shape. 3M was having a sale on their CF material wrap so this is the result:
![](http://farm5.static.flickr.com/4044/4242493666_87c43cc401_b.jpg)
lamin-X turn signal covers:
![](http://farm5.static.flickr.com/4005/4439673612_c0da88b627_b.jpg)
Bride knockoffs:
![](http://farm5.static.flickr.com/4066/4439675158_02ed152dd4_b.jpg)
ghey stickers:
![](http://farm5.static.flickr.com/4036/4439677842_1de52f28da_b.jpg)
glamor photo:
![](http://farm5.static.flickr.com/4022/4439042429_aefb8f5cec_b.jpg)
Here's some parts that are going on soon:
![](http://farm5.static.flickr.com/4028/4241692341_59e3aa3e55_b.jpg)
Bossfrog clearview rollbar:
![](http://farm5.static.flickr.com/4066/4241730393_17e8b8b671.jpg)
New Stainless Steel Begi S4 tubular manifold:
![](http://i181.photobucket.com/albums/x71/speedf50R/PA252210.jpg)
![Name: PA252211.jpg
Views: 226
Size: 60.7 KB](https://www.miataturbo.net/attachments/build-threads-57/199326d1501240130-94r-build-pic-intensive-pa252211.jpg)
New Begi Stainless Steel Separated Gasses Downpipe w/ O2 Bung and flexpipe:
![Name: PA252212.jpg
Views: 232
Size: 53.5 KB](https://www.miataturbo.net/attachments/build-threads-57/199327d1501240130-94r-build-pic-intensive-pa252212.jpg)
![Name: PA252213.jpg
Views: 245
Size: 51.8 KB](https://www.miataturbo.net/attachments/build-threads-57/199328d1501240130-94r-build-pic-intensive-pa252213.jpg)
K&N intake filter and inlet tube:
![Name: PA252214.jpg
Views: 213
Size: 54.3 KB](https://www.miataturbo.net/attachments/build-threads-57/199329d1501240130-94r-build-pic-intensive-pa252214.jpg)
Begi heatshield:
![Name: PA252216.jpg
Views: 259
Size: 51.1 KB](https://www.miataturbo.net/attachments/build-threads-57/199330d1501240130-94r-build-pic-intensive-pa252216.jpg)
Megasquirt DIYPNP:
![](http://farm3.static.flickr.com/2747/4283198845_f85e87fb75_b.jpg)
![](http://farm5.static.flickr.com/4067/4283940966_306f69687a.jpg)
Flyin' Miata 10.3 lb flywheel:
![](http://farm5.static.flickr.com/4065/4287130850_bf8a496727.jpg)
and no pictures but a used SR20 GT2560 turbo, eBay intercooler piping and intercooler.
Still need stainless steel lines, fittings, ect.
#8
Junior Member
Thread Starter
iTrader: (7)
Join Date: May 2007
Location: Socal
Posts: 332
Total Cats: 0
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I sold my begi S4 manifold and dp to replace it with a begi S6 kit. I am having a tough time getting the downpipe in place. Any tips? I tried every angle I can think of, and it just isn't working. Any help please?
#10
Junior Member
Thread Starter
iTrader: (7)
Join Date: May 2007
Location: Socal
Posts: 332
Total Cats: 0
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
big updates:
I got the megasquirt up and running nicely. I installed a wideband to learn the megasquirt tuning software. Then I got an opportunity to street tune a 95 turbo miata, so that is a good learning experience for when I turbo my car. Currently, the car pulls hard (for a miata, anyways) with just basic street tuning on 93 octane gas and an increase in timing across the board.
Pics of my wideband in one of the factory air vents:
![](https://lh6.ggpht.com/_u_Fa91MHhi4/S_cnwdC1J7I/AAAAAAAACXU/7ze6a4fwxZk/s800/IMG_3993.JPG)
![](https://lh4.ggpht.com/_u_Fa91MHhi4/S_cnw-rhVKI/AAAAAAAACXY/h-qoU-foIMA/s800/IMG_3997.JPG)
The stock 5sp tranny is known to blow when boost is added. So I installed the 6 speed tranny from my parts car, along with Flyin' Miata 10.3lb flywheel and centerforce dual friction clutch. Sorry, no pics of the installation.
Boss frog clearview single hoop roll car install:
![](https://lh3.ggpht.com/_u_Fa91MHhi4/S_cnrh-xahI/AAAAAAAACW4/BYNsOQ6a1Fo/s800/IMG_3978.JPG)
While installing the rollbar, I removed my soft top (to replace it with the top from my parts car).
![](https://lh3.ggpht.com/_u_Fa91MHhi4/S_cntTjK46I/AAAAAAAACXA/mtngQm4-c00/s800/IMG_3981.JPG)
everything out:
![](https://lh4.ggpht.com/_u_Fa91MHhi4/S_cnuLwcuvI/AAAAAAAACXE/DAS1fqxvzOY/s800/IMG_3983.JPG)
I found a rusty fuel cover panel. I sanded the rust off and painted all the panels that were on top of the fuel tank.
![](https://lh6.ggpht.com/_u_Fa91MHhi4/S_cnu9i7cmI/AAAAAAAACXI/DCt_FD-YqZc/s800/IMG_3984.JPG)
End result:
![](https://lh3.ggpht.com/_u_Fa91MHhi4/S_cnv3JwM1I/AAAAAAAACXQ/YW2v2TncyMY/s800/IMG_3992.JPG)
Rspeed hood dampers:
![](https://lh4.ggpht.com/_u_Fa91MHhi4/S_cnxSvP7DI/AAAAAAAACXc/609XRIXB0Is/s800/IMG_4006.JPG)
I also repainted my valve cover. This is what I started with:
![](https://lh3.ggpht.com/_u_Fa91MHhi4/S_cn0Odb33I/AAAAAAAACXs/KEYv6KvJUn4/s800/IMG_4042.JPG)
primer:
![](https://lh5.ggpht.com/_u_Fa91MHhi4/S_cn0is7KII/AAAAAAAACXw/j3sGkiWwP0c/s800/IMG_4044.JPG)
black base:
![](https://lh3.ggpht.com/_u_Fa91MHhi4/S_cn1vmxzcI/AAAAAAAACX0/1ErERGNeTjc/s800/IMG_4045.JPG)
Design:
![](https://lh6.ggpht.com/_u_Fa91MHhi4/S_cn370bnCI/AAAAAAAACX8/8qHrMQhb4i8/s800/IMG_4049.JPG)
Final:
![](https://lh6.ggpht.com/_u_Fa91MHhi4/S_cn5pwMHVI/AAAAAAAACYA/c8MjlTf_pKU/s800/IMG_4054.JPG)
Installed RX7 460cc fuel injectors:
![](https://lh3.ggpht.com/_u_Fa91MHhi4/S_cnz-MMmaI/AAAAAAAACXo/75dKVvAPc3Y/s800/IMG_4041.JPG)
Stock 127k injectors vs. cleaned 460cc's:
![](https://lh4.ggpht.com/_u_Fa91MHhi4/S_cn2ggO0NI/AAAAAAAACX4/OQSXX8KGirE/s800/IMG_4047.JPG)
also debadged the rear license panel:
![](https://lh3.ggpht.com/_u_Fa91MHhi4/S_cnvS_iRoI/AAAAAAAACXM/anEd5PZJwTg/s800/IMG_3985.JPG)
And lastly, I put new wheels on. Kosei K1. 16x7.5+32 in the front and 17x7.5+25 in the rear:
![](https://lh4.ggpht.com/_u_Fa91MHhi4/S_cnyFMU4xI/AAAAAAAACXg/XCVZiqPPMlk/s800/IMG_4014.JPG)
Installed all-aluminum 55mm radiator with alum. shroud and slim fans wired in parallel:
![](https://lh6.ggpht.com/_u_Fa91MHhi4/TARWlCDprkI/AAAAAAAACZA/C1VLRzjtKc4/s800/IMG_4117.JPG)
![](https://lh4.ggpht.com/_u_Fa91MHhi4/TARWnsJpEFI/AAAAAAAACZQ/kZA7uFLmyHs/s800/IMG_4121.JPG)
Beginning of turbo install:
![](https://lh3.ggpht.com/_u_Fa91MHhi4/TARWqlAw5MI/AAAAAAAACZk/ZYJknzmCRXE/s800/IMG_4154.JPG)
Deleted AC and PS bracket and pulley, removed EGR.
![](https://lh3.ggpht.com/_u_Fa91MHhi4/TARWrK_yFbI/AAAAAAAACZo/U60mHKL_gsU/s800/IMG_4155.JPG)
Look at all the weight savings!
![](https://lh5.ggpht.com/_u_Fa91MHhi4/TARWsQWvV0I/AAAAAAAACZw/VbQP1webGVY/s800/IMG_4158.JPG)
Coolant rerouting to clear charge pipes.
![](https://lh3.ggpht.com/_u_Fa91MHhi4/TARWw0GTMRI/AAAAAAAACaM/2WcycMrLvp4/s800/IMG_4165.JPG)
![](https://lh3.ggpht.com/_u_Fa91MHhi4/TARWyVzxOxI/AAAAAAAACac/0FA2BDZWhp0/s800/IMG_4168.JPG)
Turbo on! Sorry, no progress pics. It did take me two days.
![](https://lh3.ggpht.com/_u_Fa91MHhi4/TARWy48PdOI/AAAAAAAACag/vE-ZF8280fs/s800/IMG_4169.JPG)
I am looking for a louder BOV. Any suggestions?
![](https://lh3.ggpht.com/_u_Fa91MHhi4/TARWzcpRr8I/AAAAAAAACak/ff-8L5PWpz4/s800/IMG_4170.JPG)
Cool air box:
![](https://lh5.ggpht.com/_u_Fa91MHhi4/TARWzyg5yiI/AAAAAAAACao/XUQmqcofBXQ/s800/IMG_4171.JPG)
Cast tubular manifold, tial 38mm wg, garret GT2860RS, 3" downpipe, all with baller v-bands:
![](https://lh3.ggpht.com/_u_Fa91MHhi4/TARW0St1iqI/AAAAAAAACas/Om6XAdFVtms/s800/IMG_4172.JPG)
![](https://lh5.ggpht.com/_u_Fa91MHhi4/TARW04dpOjI/AAAAAAAACaw/l07BICih0KQ/s800/IMG_4173.JPG)
Front mount:
![](https://lh6.ggpht.com/_u_Fa91MHhi4/TARW2Gg1ZhI/AAAAAAAACa8/eQlPSeUs1a0/s800/IMG_4176.JPG)
Currently at 10.5-11.5 PSI.
I got the megasquirt up and running nicely. I installed a wideband to learn the megasquirt tuning software. Then I got an opportunity to street tune a 95 turbo miata, so that is a good learning experience for when I turbo my car. Currently, the car pulls hard (for a miata, anyways) with just basic street tuning on 93 octane gas and an increase in timing across the board.
Pics of my wideband in one of the factory air vents:
The stock 5sp tranny is known to blow when boost is added. So I installed the 6 speed tranny from my parts car, along with Flyin' Miata 10.3lb flywheel and centerforce dual friction clutch. Sorry, no pics of the installation.
Boss frog clearview single hoop roll car install:
While installing the rollbar, I removed my soft top (to replace it with the top from my parts car).
everything out:
I found a rusty fuel cover panel. I sanded the rust off and painted all the panels that were on top of the fuel tank.
End result:
Rspeed hood dampers:
I also repainted my valve cover. This is what I started with:
primer:
black base:
Design:
Final:
Installed RX7 460cc fuel injectors:
Stock 127k injectors vs. cleaned 460cc's:
also debadged the rear license panel:
And lastly, I put new wheels on. Kosei K1. 16x7.5+32 in the front and 17x7.5+25 in the rear:
Installed all-aluminum 55mm radiator with alum. shroud and slim fans wired in parallel:
Beginning of turbo install:
Deleted AC and PS bracket and pulley, removed EGR.
Look at all the weight savings!
Coolant rerouting to clear charge pipes.
Turbo on! Sorry, no progress pics. It did take me two days.
I am looking for a louder BOV. Any suggestions?
Cool air box:
Cast tubular manifold, tial 38mm wg, garret GT2860RS, 3" downpipe, all with baller v-bands:
Front mount:
Currently at 10.5-11.5 PSI.
#12
Elite Member
iTrader: (13)
Join Date: Dec 2006
Location: Taos, New mexico
Posts: 6,763
Total Cats: 631
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Would you please give us your opinion on the knockoff bride seats?
I know people bash them, but they honestly look great. It seems to me that they MUST be better/safer than stock seats just because how much lower they put you, this is if you run them with proper harnesses/rollbar of course.
Also, for some reason since they were knockoffs i was expecting them to read BIRDE or something along those lines. Rofl.
I know people bash them, but they honestly look great. It seems to me that they MUST be better/safer than stock seats just because how much lower they put you, this is if you run them with proper harnesses/rollbar of course.
Also, for some reason since they were knockoffs i was expecting them to read BIRDE or something along those lines. Rofl.
#13
Junior Member
Thread Starter
iTrader: (7)
Join Date: May 2007
Location: Socal
Posts: 332
Total Cats: 0
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
Would you please give us your opinion on the knockoff bride seats?
I know people bash them, but they honestly look great. It seems to me that they MUST be better/safer than stock seats just because how much lower they put you, this is if you run them with proper harnesses/rollbar of course.
Also, for some reason since they were knockoffs i was expecting them to read BIRDE or something along those lines. Rofl.
I know people bash them, but they honestly look great. It seems to me that they MUST be better/safer than stock seats just because how much lower they put you, this is if you run them with proper harnesses/rollbar of course.
Also, for some reason since they were knockoffs i was expecting them to read BIRDE or something along those lines. Rofl.
#16
Junior Member
Thread Starter
iTrader: (7)
Join Date: May 2007
Location: Socal
Posts: 332
Total Cats: 0
![Default](https://www.miataturbo.net/images/icons/icon1.gif)
I love them. I haven't seen a "real" bride yet, but I don't really care. Most of my "nice car" comments usually end up along the lines of... I love those seats man. One minor gripe is that one seat is actually an inch smaller than the other one. I didn't know this until my friend sat in both.
I was iffy on the valve cover myself. But it looks much better in real life, and that matters more. The seats are mounted on factory rails. Driver's side is always a bitch and a half.
Car: 5k
S6 turbo: 5k
02 6speed tranny: 600
Roll bar: 400
Koni yellows: 600
FM springs: 200
FCM mounts: 200
wheels/tires: 750
seats: 500
cd player: 200
SE pedals: 100
exhaust: 400
sway bar: 150
FM flywheel: 250
Clutch: 350
MS mounts: 70
DIYPNP: 425
rx7 460cc: 100+50cleaning= 150
AEM wb: 230
+a lot of misc. things
So like 14-15k. Obviously you can save ALOT buying used.
S6 turbo: 5k
02 6speed tranny: 600
Roll bar: 400
Koni yellows: 600
FM springs: 200
FCM mounts: 200
wheels/tires: 750
seats: 500
cd player: 200
SE pedals: 100
exhaust: 400
sway bar: 150
FM flywheel: 250
Clutch: 350
MS mounts: 70
DIYPNP: 425
rx7 460cc: 100+50cleaning= 150
AEM wb: 230
+a lot of misc. things
So like 14-15k. Obviously you can save ALOT buying used.