FS: Harddog double diagonal M1
#1
Miotta FTW!
Thread Starter
iTrader: (24)
Join Date: Jun 2006
Location: Chicagoland, IL
Posts: 4,290
Total Cats: 31
FS: Harddog double diagonal M1
Selling one used Hard Dog Double Diagonal M1 Hard Core.
No harness bar, but otherwise identical to this bar:
Includes all hardware, including seat belt mounting locations spacers and bolts/washers/locknuts.
Price is firm at 250.
Local Pickup VERY preferred.
No harness bar, but otherwise identical to this bar:
Includes all hardware, including seat belt mounting locations spacers and bolts/washers/locknuts.
Price is firm at 250.
Local Pickup VERY preferred.
#2
hey uh, your second pic is the X-brace sold only on good-win-racing.com
Double diagonal is different from x-brace, and not as cool-looking imo lol
if yours is x-brace...I'll take it. If it fits under a hardtop.
Double diagonal is different from x-brace, and not as cool-looking imo lol
if yours is x-brace...I'll take it. If it fits under a hardtop.
#9
you call and tell them to send you one with harness tabs rather then a harness bar. if you have a glass window i know you can't have a harness bar.
#12
I think you may have an M2 which comes with harness tabs and also has straight backs as well (unlike the M2 sport which has curved ones). That makes it even more desirable imo..!
jeff,
With the harness bar the glass rests on the harness when you lower it and the rear support gets in the way a bit as well. So just removing the harness bar is not going to solve the compatibility issue. I have an M1 on my MSM with stock NB top as the PO installed it instead of an M2 for whatever reason. When the top goes down it sticks up a few inches, otherwise it's fine.
jeff,
With the harness bar the glass rests on the harness when you lower it and the rear support gets in the way a bit as well. So just removing the harness bar is not going to solve the compatibility issue. I have an M1 on my MSM with stock NB top as the PO installed it instead of an M2 for whatever reason. When the top goes down it sticks up a few inches, otherwise it's fine.
Last edited by newold_m; 07-28-2010 at 12:42 PM. Reason: clarification
#13
If it's still around this weekend I'd pay another $50 if you meet me half way to Ann Arbor, though that's more trouble than shipping it, I suppose...
Feel free to drop me a line at grendel@gmail.com
Feel free to drop me a line at grendel@gmail.com
#18
well if all these others fall through and you decide to ship to dallas, I'll take it. Greyhound actually ships fairly cheap and all you'd have to do is bubble wrap it and drop it off at a greyhound stop...
#19
I work at CDH. please pm me ur contact info if bar is still available.
Last edited by eldonie; 07-29-2010 at 02:48 AM.
Thread
Thread Starter
Forum
Replies
Last Post
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM