2002 Mazda Miata - $11000
#1
Thread Starter
Junior Member
iTrader: (2)
Joined: Dec 2012
Posts: 107
Total Cats: 11
From: Los Angeles, CA
2002 Mazda Miata - $11000
Category: Import
Status: Clean Title
I have a 2002 Mazda Miata for sale, in USA - Texas.
Mileage: 90000 miles
Asking price is $11000
Seller Information:
Phone: (310) 467-4117
Email: ryan@ryanreese.com
Well the time has come, unfortunately. Priorities in life have taken over and I'm forced to downsize my car collection. So the miata has the go. I'm incredibly detail orientated and I've always believed in spending the money and doing everything right the first time with quality parts.
The car is clean title, never been in an accident. It does have a few small dings and paint scratches but overall the exterior is in good shape.
Here's a break down of the parts currently installed.
Suspension/brakes:
949 racing xida coilovers 750/450# springs
6piston front 4 piston rear brakes (flying miata big mama jamma kit)
adjustable brake proportioning valve
Racing beat hollow front sway bar, MSM rear sway bar, spherical end links
Energy Suspension bushings
Engine:
1.8L VVT engine, 9:1 compression supertech pistons, forged rods, balanced bottom end, ACL race bearings, brand new water pump and BE street/strip oil pump
Rebello racing headwork, Cat Cams turbo cams, Supertech valvetrain, supertech stainless intake valves, inconel exhaust valves, solid lifters
ARP head and main studs
3000 miles since rebuild
Flyin Miata turbo kit (2560r) with large intercooler and 3” down pipe
Flyin Miata crossflow radiator with stage 2 shroud kit
Flyin Miata oil cooler kit
Flyin Miata ignition coil kit with LS2 coils
K-tuned coolant reroute
ATI racing crank damper
Skunk2 billet throttle body
OEM flat top intake manifold
Injector Dynamic 1000cc injectors
Walbro 255HP fuel pump
Enthuza 3” exhaust, stainless
MSLabs Megasquirt 3 with CAN wideband interface
Innovative LC-2 wideband
AN oil and water lines to turbo
AN fuel lines with Fuelab FPR and billet fuel rail
Drivetrain:
949 racing twin racing clutch
6 speed transmission
3.9 Torsen rear end with solid delrin mounts
FM frame rails
Full sport bracing
Exterior/interior:
Color matched OEM hardtop
Hard dog double diagonal sport roll bar
Hard dog door bars
F1Spec bucket seats with garage star seat mounts
Custom front splitter
APC carbon 3d rear wing
Rota grid concave 15x9 wheels
Toyo R1R wheels 225/45/15
oil/water temp gauge, boost/oil pressure gauge
Not installed but included with purchase
SuperMiata competition motor mounts
949racing master cylinder kit
small version side skirt kit
Car makes 330hp at the wheels on a dynojet and the dyno sheet will be provided. Tuned by Stephanie at BEGI
Does not have AC or PS.
The car is a blast to drive. It's setup to turn some pretty awesome laptimes. I've never had it on the track.
It's currently registered in Texas and located in Houston. Test drives are available to serious buyers. I'd be willing to drive it to a buyer if they pay for airfare back to Texas. Not interested in trades. As stated I'm selling the car to downsize.
Status: Clean Title
I have a 2002 Mazda Miata for sale, in USA - Texas.
Mileage: 90000 miles
Asking price is $11000
Seller Information:
Phone: (310) 467-4117
Email: ryan@ryanreese.com
Well the time has come, unfortunately. Priorities in life have taken over and I'm forced to downsize my car collection. So the miata has the go. I'm incredibly detail orientated and I've always believed in spending the money and doing everything right the first time with quality parts.
The car is clean title, never been in an accident. It does have a few small dings and paint scratches but overall the exterior is in good shape.
Here's a break down of the parts currently installed.
Suspension/brakes:
949 racing xida coilovers 750/450# springs
6piston front 4 piston rear brakes (flying miata big mama jamma kit)
adjustable brake proportioning valve
Racing beat hollow front sway bar, MSM rear sway bar, spherical end links
Energy Suspension bushings
Engine:
1.8L VVT engine, 9:1 compression supertech pistons, forged rods, balanced bottom end, ACL race bearings, brand new water pump and BE street/strip oil pump
Rebello racing headwork, Cat Cams turbo cams, Supertech valvetrain, supertech stainless intake valves, inconel exhaust valves, solid lifters
ARP head and main studs
3000 miles since rebuild
Flyin Miata turbo kit (2560r) with large intercooler and 3” down pipe
Flyin Miata crossflow radiator with stage 2 shroud kit
Flyin Miata oil cooler kit
Flyin Miata ignition coil kit with LS2 coils
K-tuned coolant reroute
ATI racing crank damper
Skunk2 billet throttle body
OEM flat top intake manifold
Injector Dynamic 1000cc injectors
Walbro 255HP fuel pump
Enthuza 3” exhaust, stainless
MSLabs Megasquirt 3 with CAN wideband interface
Innovative LC-2 wideband
AN oil and water lines to turbo
AN fuel lines with Fuelab FPR and billet fuel rail
Drivetrain:
949 racing twin racing clutch
6 speed transmission
3.9 Torsen rear end with solid delrin mounts
FM frame rails
Full sport bracing
Exterior/interior:
Color matched OEM hardtop
Hard dog double diagonal sport roll bar
Hard dog door bars
F1Spec bucket seats with garage star seat mounts
Custom front splitter
APC carbon 3d rear wing
Rota grid concave 15x9 wheels
Toyo R1R wheels 225/45/15
oil/water temp gauge, boost/oil pressure gauge
Not installed but included with purchase
SuperMiata competition motor mounts
949racing master cylinder kit
small version side skirt kit
Car makes 330hp at the wheels on a dynojet and the dyno sheet will be provided. Tuned by Stephanie at BEGI
Does not have AC or PS.
The car is a blast to drive. It's setup to turn some pretty awesome laptimes. I've never had it on the track.
It's currently registered in Texas and located in Houston. Test drives are available to serious buyers. I'd be willing to drive it to a buyer if they pay for airfare back to Texas. Not interested in trades. As stated I'm selling the car to downsize.
#4
#5
2002 Miata Turbo
I am interested, is the car still available?
Thread
Thread Starter
Forum
Replies
Last Post