1990 Autokonexion 1.8l Mazda Miata - $7,500 (Price Reduced)
#1
1990 Autokonexion 1.8l Mazda Miata - $7,500 (Price Reduced)
Category: Import
Status: Clean Title
I have a 1990 Mazda Miata for sale, in USA - California.
Mileage: 170k miles
Asking price is $7,500
For sale: 1990 Mazda Miata w/autokonexion wide body/hardtop/Swapped and Rebuilt 95 1.8L.
Seller: Whats up guys, got the miata up for sale once again. I am moving and cannot take the car with me. I will be in the works of building another track car soon, but for the mean time, its got to go. The main information is below. Feel free to PM me if you have questions. Thanks
Car:
-1990 Mazda Miata
-Clean Title
-170k Miles on chassis
Engine:
-Swapped 1990 1.6l to a 1995 1.8L (Completely rebuilt w/3000k miles)
-Stock pistons, rods, and crank. All external parts replaced
-Stock Internals have 87k miles before rebuild
-Flying Miata 1.8l Engine swap kit with harness
-Weisco piston rings
-ACL Upper and lowers race bearings (Rods and Mains)
-ACL cam bearings
-New water pump
-New timing belt
-New timing bearings
-New Crank Seals
-Honed cylinders
-Head shaved/pressure checked (Head worked over by Robs Machine shop)
-All new gaskets
-New OEM motor mounts
-Balanced Crank
-New NGK plugs, wires, etc.
-New Alternator
-New oil pump
-New fuel filter
-New Koyo Radiator
-New Thermostat
-New Coolant
-EGR block off plate kit
-Much more. . ... Call for questions
Transmission
-1995 5-speed 1.8l transmission (Original 94k miles. No grinds)
-Front input shaft seal
-Rear Yolk seal
-New fluids
-New Exedy clutch
-New throw out bearing
-New Exedy pressure plate
-Flywheel resurfaced by Robs Machining
-New transmission mount
-New Yolk joints on drive shaft w/bolts
-New clutch fluid
Rear end:
-Stock, no noise, no slipping.
-Fluids changed
-New Polyurethane rear-end mounts
Suspension and Wheels:
-Tein Street Basic Coil overs
-Upper and Lower A-arm Polyurethane bushings (All Prothane bushings on car)
-Eibach Front and Rear sway bars
-Prothane Polyurethane sway bar bushings
-Aligned and Balance
-XXR 527 17x9.75 all four corners
-Muteki SR48 lug nuts
-ARP Extended Wheel Studs
Tires: Federal 235/45/17 Fronts (Brand New)
Tires: Federal 255/45/17 Rear (Brand New)
Brakes
-OEM 1.8l Caliper Conversion from 1.6l
-New 1.8l Pads
-New 1.8l rotors
-New Fluids
Interior
-Bone stock
-Pioneer Deck (USB and blue tooth, AUX compatible) (New)
-Kicker 6inch speakers (New)
Exterior
-Autokonexions GT-Widebody kit
-Autokonexions Fastback hardtop
-Autokonexions trunk lid
-New 2-stage viper white paint (SCC Customs and Collision)
-APR Formula GT 3Mirrors with custom made mirror mounts
-New Windshield wipers
-New Lights all four corners
-All body work and fiberglass professionally installed
Cons:
-Broken Cluster hood tabs
-Speedo cable broken
-Hardtop hold-downs not installed
-A/C has small leak but all components are good
-Oil pressure gauge not hooked up
Photo:
I have lots more information about this car and many more parts on the car not listed. All parts are brand new. Registration is up to date and most paperwork in hand (moving homes). Title in hand. Give me a call for additional info. Thanks for looking.
Jesse
send me a Pm
$7,500 or best offer
Status: Clean Title
I have a 1990 Mazda Miata for sale, in USA - California.
Mileage: 170k miles
Asking price is $7,500
For sale: 1990 Mazda Miata w/autokonexion wide body/hardtop/Swapped and Rebuilt 95 1.8L.
Seller: Whats up guys, got the miata up for sale once again. I am moving and cannot take the car with me. I will be in the works of building another track car soon, but for the mean time, its got to go. The main information is below. Feel free to PM me if you have questions. Thanks
Car:
-1990 Mazda Miata
-Clean Title
-170k Miles on chassis
Engine:
-Swapped 1990 1.6l to a 1995 1.8L (Completely rebuilt w/3000k miles)
-Stock pistons, rods, and crank. All external parts replaced
-Stock Internals have 87k miles before rebuild
-Flying Miata 1.8l Engine swap kit with harness
-Weisco piston rings
-ACL Upper and lowers race bearings (Rods and Mains)
-ACL cam bearings
-New water pump
-New timing belt
-New timing bearings
-New Crank Seals
-Honed cylinders
-Head shaved/pressure checked (Head worked over by Robs Machine shop)
-All new gaskets
-New OEM motor mounts
-Balanced Crank
-New NGK plugs, wires, etc.
-New Alternator
-New oil pump
-New fuel filter
-New Koyo Radiator
-New Thermostat
-New Coolant
-EGR block off plate kit
-Much more. . ... Call for questions
Transmission
-1995 5-speed 1.8l transmission (Original 94k miles. No grinds)
-Front input shaft seal
-Rear Yolk seal
-New fluids
-New Exedy clutch
-New throw out bearing
-New Exedy pressure plate
-Flywheel resurfaced by Robs Machining
-New transmission mount
-New Yolk joints on drive shaft w/bolts
-New clutch fluid
Rear end:
-Stock, no noise, no slipping.
-Fluids changed
-New Polyurethane rear-end mounts
Suspension and Wheels:
-Tein Street Basic Coil overs
-Upper and Lower A-arm Polyurethane bushings (All Prothane bushings on car)
-Eibach Front and Rear sway bars
-Prothane Polyurethane sway bar bushings
-Aligned and Balance
-XXR 527 17x9.75 all four corners
-Muteki SR48 lug nuts
-ARP Extended Wheel Studs
Tires: Federal 235/45/17 Fronts (Brand New)
Tires: Federal 255/45/17 Rear (Brand New)
Brakes
-OEM 1.8l Caliper Conversion from 1.6l
-New 1.8l Pads
-New 1.8l rotors
-New Fluids
Interior
-Bone stock
-Pioneer Deck (USB and blue tooth, AUX compatible) (New)
-Kicker 6inch speakers (New)
Exterior
-Autokonexions GT-Widebody kit
-Autokonexions Fastback hardtop
-Autokonexions trunk lid
-New 2-stage viper white paint (SCC Customs and Collision)
-APR Formula GT 3Mirrors with custom made mirror mounts
-New Windshield wipers
-New Lights all four corners
-All body work and fiberglass professionally installed
Cons:
-Broken Cluster hood tabs
-Speedo cable broken
-Hardtop hold-downs not installed
-A/C has small leak but all components are good
-Oil pressure gauge not hooked up
Photo:
I have lots more information about this car and many more parts on the car not listed. All parts are brand new. Registration is up to date and most paperwork in hand (moving homes). Title in hand. Give me a call for additional info. Thanks for looking.
Jesse
send me a Pm
$7,500 or best offer
Last edited by baystreetjdm; 11-13-2014 at 04:54 PM. Reason: price change
#4
#5
#6
#8
#9
Thread
Thread Starter
Forum
Replies
Last Post
Jike Spingleton
Cars for sale/trade
3
09-20-2016 04:33 PM
Rudes333
Miata parts for sale/trade
17
11-05-2015 01:16 PM
elior77
Suspension, Brakes, Drivetrain
14
09-17-2015 09:20 PM